Weber Summit 625 NG Step-by-step Manual - Continue to Remove
3
CONTINUE TO REMOVE
PACKAGED CONTENTS
TOOLS NEEDED
SUPPLIES NEEDED
7/16 and 3/4 inch open end or an adjustable wrench
Your LP tank is shipped empty for safety. After setting the
LP fuel scale you will need to fill it. (See Step "Fill LP tank.")
You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Note - The hardware size of nuts, bolts and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2 inches
long. On a small screw for example, "6-32 x 1/2 inch
screw" means a number 6 screw, with 32 threads to the
inch, 1/2 inch long.
While we give much attention to our products,
unfortunately an occasional error may occur. If a part is
missing, do not go back to the store. Call the Weber
Customer Service Center toll free
1-888-33-SUMMIT
(1-888-337-8664) to receive immediate assistance.
Have your owner’s manual and serial number of the
barbecue available for reference.
Cooking grate
(2) (Summit 425 or 450)
(3) (Summit 625 or 650)
Flavorizer bar
(7) (Summit 425 or 450)
(11) (Summit 625 or 650)
Bottom tray
1/4-20 x 1/2 inch bolt (8)
Nylon washer (8)
Steam-N-Chips smoker
Note: If you use the Steam-N-
Chips Smoker, you will be
removing one of the Flavorizer
bars. You have a full set of
Flavorizer bars to use when not
using the Steam-N-Chips smoker.
Warm-up rack
“U” rails (2)
1/4-20 wing nuts (4)
Drip pan
Catch pan
Catch pan holder