Weber Vieluxe Slide-In Dual Burner Station Owner's Manual - General Maintenance
10
Reinstall control panel
Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the burner station.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.
GENERAL MAINTENANCE
Reinstall burner control knobs & igniter wires
You will need: 2 control knobs, Igniter button and
igniter nut.
Place control knobs(1) in through the bezels onto the
valve stems. Push the igniter(4) through the control
panel so that the threads appear, replace the igniter
nut(3) and the igniter button(2).
You will need: 2 control knobs, Igniter button and
igniter nut.
Place control knobs(1) in through the bezels onto the
valve stems. Push the igniter(4) through the control
panel so that the threads appear, replace the igniter
nut(3) and the igniter button(2).
Screws
Control Panel
Control Panel
Bracket
Screws
Control Panel
Control Panel
Bracket
Countertop Burner Station
Slide-In Burner Station
(1)
(2)
(1)
(3)
(4)
(1)
(2)
(1)
(3)
(4)
Slide-In Burner Station
Countertop Burner Station