Weber Vieluxe Slide-In Dual Burner Station Installation Manual
CLEARANCE FROM COMBUSTIBLE SURFACES OR STRUCTURES
WARNING: Clearance from any surface or structure is 26 inches from the back and sides of
the burner station. Refer to “Typical Gas Supply Installation” before starting installation.
LOCATING YOUR SIDE BURNER
When determining a suitable location for your side burner installation, give attention to concerns such as exposure to
wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Never locate the Vieluxe
®
side
burner in a garage, breezeway, shed, under an unprotected overhang, or other enclosed area. Locate the burner station
and structure so there is enough room to safely evacuate the area in case of a fire.
Built-In Natural Gas Burner Station Installation Guide
Vieluxe
®
Countertop Dual Burner Station
(Model #: 37152)
Vieluxe
®
Slide-In Dual Burner Station
(Model #: 36152)
THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY.
WARNING: The structure, “island”, countertops, and adjacent work areas for the built-in
burner station installation must be built from non-combustable materials only.
NOTE: If you have questions on what materials are considered non-combustable, contact you
local building supplier or fire department.
61344 021304
Any Surface
Any Surface
26 inches Any Surface
26 inches
26 inches
Side Burner