Weber Vieluxe Slide-In Dual Burner Station Installation Manual - Slide-In Burner
6
Gas Line
Adjustable Feet
Burner Station
Frame
Foot fully extended
and secured
Foot not fully extended
SLIDE-IN BURNER
STATION INSTALLATION
CAUTION: Use two people to lift and install the
Vieluxe
®
slide-in burner station.
1) Lift the burner station out of the packaging.
2) Make sure that the Adjustable Feet are fully extended
and secure before setting burner station in place.
3) Push the burner station into the “island” structure
making sure that the burner station frame does not
rest on the top of the “island” structure. Make sure the
grill is resting on it’s Adjustable Feet only.
4) Guide the gas line through the access hole in the
burner station frame while installing the burner station.
Burner
Station
Frame
"Island" Structure
Countertop
Silicon
Sealant
5) Lower the burner station by adjusting the feet
until the burner station frame is resting firmly on the
"island" countertop.
Note: Make sure that the burner station is level on the
"island" countertop.
6) Once the burner station is level with top of the “island”
structure, apply a bead of silcon sealant around the
perimeter and front sides of the burner station that is in
contact with the “island” structure. This will prevent
moisture seepage. The sealant you use must have a
temperature rating above 120° F.