WebGate WebEye A10 User Manual

Other manuals for WebEye A10: User Manual

Summary of WebEye A10

  • Page 1

    Webeye a10 manual ver 1.2 webeye a10 user’s guide webgate inc. This information is to connect webeye a10 to webeye e10/e104. For information on webeye e10/e104 please visit client support page in webgate internet homepage and download related information. Http://www.Webgateinc.Com.

  • Page 2

    I. Introduction webeye a10 is an audio transmission kit which can use with connecting to webeye e10/e104. Users may hear real-time sound with image from remote place through webeye’s homepage connected to webeye a10, and use for remote- monitoring, audiovisual conference, etc. Ii. Product descriptio...

  • Page 3

    Iii. Webeye a10 connecting & configuring 1. Connecting webeye a10 to webeye e10 1) connect power supply to webeye a10 2) connect dedicated cable between webeye e10 and webeye a10 3) check led on webeye a10. Led goes on when it is powered and blinks when transmit ting data. * make sure not to initial...

  • Page 4

    3. Configuring webeye e10/e104 1) start web browser and access webeye e10/e104. 2) enter administration page of webeye e10/e104. 3) select ‘serial configuration’ in administration menu. 4) select ‘audio device’ in ‘select attached device’ menu. 5) select ‘on’ in ‘agc control enable’ in agc(automatic...

  • Page 5

    Iv. Specifications of webeye a10 v. Reference facts 1. Access condition • audio quality depends on upload rate of internet, round trip time between user and webeye, and packet loss degree. • when webeye is connected to adsl/isdn/ppp or connection state is bad, audio may be cut off or may not be oper...

  • Page 6

    • webeye a10 has high-sensitivity internal microphone, so it may transmit with being amplified both surrounding noise and signal. In case of severe noise, we recommend using external microphone. • in using agc(automatic gain control) function, you can’t configure volume at webeye administration page...