Weed Eater 1000E Instruction Manual

Other manuals for 1000E: Instruction Manual, Instruction Manual

Summary of 1000E

  • Page 1

    Eng l is h esp aÑo l f ranÇais warning: read and follow all safety rules and operating instructions before using this product. Failure to do so can result in serious injury. Advertencia: lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. El no hacerlo puede re...

  • Page 2

    2 identification of symbols danger! This lawn edger can be dangerous! Careless or improper use can cause serious or even fatal injury. Read and understand the instruction manual before using the lawn edger. Always wear appropriate ear protection, eye protection and head protection. Safety rules warn...

  • Page 3

    3 s avoid dangerous environments. Do not use in unventilated areas or where dust or explo- sive vapors can build up. S to reduce the risk of electrical shock, use ex- tension cords specifically marked as suitable for outdoor appliances. The electrical rating of the cord must not be less than the rat...

  • Page 4

    4 edging safety warning: inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by the blade or can wrap around the shaft. S keep others including children, animals, by- standers, and helpers at least 50 feet (15 me- ters) aw...

  • Page 5

    5 standards: this edger attachment is listed by underwriter’s laboratories, inc., in ac- cordance with ul standard 1602, “gasoline--engine--powered, rigid--cutting--member, edgers and edger trimmers,” only when used with the following models: 31cc powerhead (with trimmer attachment) 31wg . . . . . ....

  • Page 6

    6 operation know your edger attachment read this instruction manual and safety rules before operating your edg- er attachment. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Dept...

  • Page 7

    7 installing attachment hanger an attachment hanger is provided for storage when attachment is not in use. To install hanger on attachment: 1. Remove the shaft cap from the attachment (if present) and discard. 2. Press and hold the locking/release button. 3. Push hanger onto the attachment until the...

  • Page 8

    8 maintenance warning: always stop unit and dis- connect spark plug wire (or disconnect pow- erhead from power source) before performing maintenance. Check for damaged or worn parts contact an authorized service dealer for re- placement of damaged or worn parts. S blade shield -- discontinue use of ...

  • Page 9

    9 storage warning: perform the following steps after each use: s allow attachment and gearbox to cool be- fore storing or transporting. S store attachment with blade shield in place. Position attachment so that any sharp ob- ject cannot accidentally cause injury. S store the attachment in a dry, wel...