1. DL manuals
  2. Weed Eater
  3. Trimmer
  4. 1000E
  5. Instruction Manual

Weed Eater 1000E Instruction Manual

Other manuals for 1000E: Instruction Manual, Instruction Manual

Summary of 1000E

  • Page 1

    En glish esp a Ñ o l franÇais warning: read and follow all safety rules and operating instructions before using this product. Failure to do so can result in serious injury. Advertencia: lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. El no hacerlo puede res...

  • Page 2

    2 safety rules warning: when using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instructions. This power unit can be dangerous! Operator is responsible for following instructions and warnings on unit and i...

  • Page 3

    3 extension cord before each use. If there is any damage, do not use until damage is re- paired by your authorized service dealer. S do not pull or carry by cord; do not use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do no...

  • Page 4

    4 allow blades to stop before removing them from the cut. Warning: blades can throw objects violently . D you can be blinded or injured. D wear safety glasses and boots. Warning: hazard zone for thrown objects. D blades can throw objects violently. D others can be blinded or injured. D keep people a...

  • Page 5

    5 assembly warning: if received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. Examine parts for damage. Do not use dam- aged parts. Note: if you need assistance or find parts missing or damaged, call 1-800-554-6723. Tools required s hex wrench (p...

  • Page 6

    6 operation know your edger attachment read this instruction manual and safety rules before operating your edg- er attachment. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Dept...

  • Page 7

    7 4. Before using the unit, tighten the knob se- curely by turning clockwise. Installing attachment hanger an attachment hanger is provided for storage when attachment is not in use. To install hanger on attachment: 1. Remove the tube cap from the attachment (if present) and discard. 2. Press and ho...

  • Page 8

    8 maintenance warning: always stop unit and dis- connect spark plug wire (or disconnect pow- erhead from power source) before performing maintenance. Check for damaged or worn parts contact an authorized service dealer for re- placement of damaged or worn parts. S blade shield -- discontinue use of ...

  • Page 9

    9 storage warning: perform the following steps after each use: s allow attachment and gearbox to cool be- fore storing or transporting. S store attachment with blade shield in place. Position attachment so that any sharp ob- ject cannot accidentally cause injury. S store the attachment in a dry, wel...