5
HOW TO ADJUST THE BENCH
To adjust the angle of the bench, first remove
one of the Large Foam Pads (7) from the lower
Pad Tube (4).
Next, remove the Pad Tube (4) from the Leg (2).
Adjust the Adjustment Foot (8) to the
desired height, and then reinsert the Pad
Tube (4) into the Leg (2) and the Adjustment
Foot.
Then, slide the Large Foam Pad (7) onto the
Pad Tube (4).
HOW TO FOLD THE BENCH
To fold the bench, first remove the Adjustment
Pin (14).
Next, fold the Leg (2) in the indicated direction.
Before using the bench, make sure that the
Adjustment Pin (14) is fully inserted into the
Leg (2) and the Frame (1).
2
2
1
7
4
8
14
ADJUSTMENT
Make sure that all parts are properly tightened each time the bench is used. Replace any worn parts immedi-
ately. The bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents.