1. DL manuals
  2. Weider
  3. Home Gym
  4. 140
  5. User Manual

Weider 140 User Manual

Other manuals for 140: User Manual, User Manual

Summary of 140

  • Page 1

    Model no. Webe06920 serial no. Write the serial number in the space above for future reference. Caution read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial number decal user’s manual visit our website at www.Weiderfitness....

  • Page 2: Table of Contents

    2 important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 a...

  • Page 3: Warning:

    3 warning: to reduce the risk of serious injury, read the following important precautions before using the weight bench. 1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure th...

  • Page 4: Before You Begin

    4 backrest weight rests support rod upright decal 1 decal 2 leg lever weight tube weight tube curl pad fly arm thank you for selecting the weider ® 140 weight bench. The versatile weider ® 140 weight bench is designed to be used with your own weight set (not included) to develop every major muscle g...

  • Page 5: Assembly

    Before beginning assembly, carefully read the following information and instructions: • assembly requires two people. • for help identifying small parts, refer to the part identification chart. • tighten all parts as you assemble them, unless instructed to do otherwise. • as you assemble the weight ...

  • Page 6

    3. Attach the front leg (8) to the frame (2) with two m8 x 40mm bolts (39), four m8 washers (16), and two m8 nylon locknuts (17). Note: do not tighten the nylon locknuts yet. 4. Attach the frame (2) to the crossbar (3) with two m8 x 55mm bolts (18), the support plate (40), and two m8 nylon locknuts ...

  • Page 7

    7. Tap two 19mm round inner caps (9) into each long pad tube (10). Slide the pad tubes through the holes in the leg lever (4). Slide two long foam pads (23) onto each pad tube. 8. Tap two 25mm square inner caps (35) into each of the two backrest tubes (5). Attach each backrest tube (5) to the backre...

  • Page 8

    8 11. Tap a 30mm square inner cap (22) into each end of a fly arm (25). Push a 25mm round inner cap (24) into the end of the weight tube. Slide a weight stop (28) onto the weight tube. Assemble the other fly arm (not shown) in the same manner. 12. Tap a fly arm stop (15) onto the welded tube on each...

  • Page 9: Warning:

    Attaching weights to use the leg lever (4), slide the desired weights onto the weight tube on the leg lever. Do not place more than 50 pounds on the leg lever. To use the fly arms (25), make sure there is a weight stop (28) on each weight tube. Next, slide the desired amount of weight onto the weigh...

  • Page 10

    10 attaching the curl pad for some exercises, the curl pad (37) needs to be attached to the weight bench. To do this, remove the 30mm square inner cap (22) from the front leg (8). Insert the curl post (38) into the front leg and align an adjustment hole in the curl post with the adjust- ment hole in...

  • Page 11: Notes

    11 notes.

  • Page 12: Limited Warranty

    Limited warranty icon health & fitness, inc. (icon), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase. This warranty extends only to the original purchaser. Icon's obligati...

  • Page 13: Part List/exploded Drawing

    81 remove this part identification chart part list/exploded drawing save this part identification chart part list/exploded drawing for future reference.

  • Page 14: Part Identification Chart

    This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the part list in the center of this manual. Important: some parts may have been pre-assembled for shipping purposes. If you cannot find a ...

  • Page 15

    Key no. Qty. Description key no. Qty. Description 1 2 upright 2 1 frame 3 1 crossbar 4 1 leg lever 5 2 backrest tube 6 1 backrest 7 1 support rod 8 1 front leg 9 8 19mm round inner cap 10 2 long pad tube 11 1 seat 12 2 short pad tube 13 2 butterfly knob 14 4 plastic bushing 15 2 fly arm stop 16 8 m8...

  • Page 16

    7 11 2 21 3 21 8 25 18 18 14 13 16 16 15 17 40 19 9 24 28 22 22 27 17 18 31 1 12 9 9 14 17 1 13 15 14 17 16 16 14 21 25 22 27 22 19 24 28 9 12 29 29 10 22 23 9 24 4 9 23 22 32 33 20 17 39 16 16 22 18 18 30 6 5 30 26 26 35 34 33 34 36 5 35 22 22 41 17 17 42 37 29 38 exploded drawing—model no. Webe069...