Wood Master MB30 Series Owner's Manual - page 39
39
Mini Boiler Owners Manual
2015
Warranty
This Warranty is provided by Northwest Manufacturing, Inc. only for the benefit of the initial purchaser (Original Owner) of the
Northwest Manufacturing, Inc. WoodMaster Mini Boiler (the “Boiler”) on the original site of installation (the “Site of Original Installa-
tion”). This Warranty provides specific legal rights. You may have other rights depending on where you live.
The rights in this warranty depend on the proper assembly, installation and commissioning of the Boiler by a dealer or installer who
is certified by Northwest Manufacturing, Inc. (the “Certified Contractor”); and proper operation and maintenance. Proper mainte-
nance in accordance with the Maintenance Intervals (as defined herein) must be preformed. Installation by an uncertified or
unqualified contractor or installer and/or improper maintenance, operation, misuse or abuse of the Boiler shall void this Warranty in
whole or in part.
LIMITED FIVE (5) YEAR WARRANTY FOR THE PRESSURE VESSEL
Northwest Manufacturing, Inc. warrants that the Pressure Vessel shall be free of defects in material andworkmanship for FIVE (5)
YEARS from the Date of Original Installation. If there is a defect in your properly delivered and installed WoodMaster Mini Boiler in
the first year, WoodMaster will replace the Pressure Vessel at no cost to the original owner. Northwest Manufacturing, Inc. will
only pay costs of warranty work for years two (2) through five (5) – 100% of warranty work, once a defect is determined, repair or
replacement of the Pressure Vessel, in a whole or part, will be at the sole discretion of Northwest Manufacturing, Inc..
LIMITED ONE (1) YEAR WARRANTY ON THE BURNER AND ELECTRICAL COMPONENTS
Northwest Manufacturing, Inc. warrants to the Original Owner, That the Renovator Pellet Burner (the “Burner”) is free from manufac-
turing defects for the period of one (1) year from the date of installation. Northwest Manufacturing, Inc. will not warranty the Flame
Guard and endstop on the burner, these items are consumable items and in the case of normal wear is the responsibility of the
owner to replace as necessary. Northwest Manufacturing, Inc. warrants any electrical components are free from defects for the
period of one (1) year from the date of installation. Northwest Manufacturing, Inc. will determine whether to repair or replace the
defective parts. This is to include the air compressor and pellet feed auger motor.
LIMITED ONE (1) YEAR WARRANTY ON ADDITIONAL COMPONENTS
Northwest Manufacturing, Inc. warrants to the original owner only, any additional components, including, but not limited to the
outer shell, paint, insulation, doors and latches during normal usage for a period of one (1) years from the date of installation.
START OF WARRANTY PERIODS
The Warranty Period shall begin on the date the Boiler and Burner installation has been completed (the “Original Date of Installa-
tion”). In the event of dispute as to the Date of Original Installation, the shipping date of your Boiler and Burner, as recorded by
Northwest Manufacturing, Inc., shall be deemed to be the Date of Original Installation.
WARRANTY LIMITATIONS
I. Damages for unsatisfactory performance caused by improper installation or any damages caused by or as a result of improper
use of the Boiler and Burner, incorrect start-up, incorrect or careless handling, improper control adjustment, incorrect burner
adjustment, disregard of the operating instructions and proper maintenance or disregard of any other instructions supplied with
the Boiler and Burner, improper operation of the Boiler and Burner or improper alteration and repairs/service by a third party not
affiliated with Northwest Manufacturing, Inc. will not be covered under this warranty. All repairs must be performed by a Certified
Contractor.
II. The warranty will not cover damage to parts caused by improper installation, improper care or maintenance. The Boiler, Burner
and any installed accessories must be serviced, inspected and cleaned at regular intervals. Northwest Manufacturing, Inc. will NOT
warranty damage to the Boiler and Burner due to ash corrosion.
III. The workmanship, repairs or replacement of parts of the Certified Contractor will not be covered under this warranty.
IV. Components of the heating system not furnished by Northwest Manufacturing, Inc. as part of the Boiler and Burner and compo-
nents of the Burner are not covered under this Warranty. Damages caused by components of the heating system not supplied by
Northwest Manufacturing, Inc. will not be covered under this Warranty.
V. Fuels used in the Burner must meet the specifications set out by Northwest Manufacturing, Inc.. Suitable fuels are listed in the
owners manual. Damage caused by the use of any unapproved fuel, or any fuel that does not meet the guidelines set forth by
Northwest Manufacturing, Inc. will not be covered by this warranty. The burner must be tested and tuned to proper feed rates
according to the owners manual. Failure to properly tune the burner will result in a voided warranty.
FIVE (5) YEAR LIMITED WARRANTY - PRESSURE VESSEL