Wood Pellet WPGGE1.5L Owner's Manual - page 4
Do not hang clothing or flammable materials either on or near the device on or inside the Oven.
Allow 45 minutes for the unit to cool down after use before attempting to move.
Do not operate a damaged Gravity Grill.
Never use petroleum based flammable vapors or liquids in or near this heater.
Warning:
When the Grill is to be operated in the presence of other people, the owner/purchaser is required to
inform people unfamiliar with the product of the hazards involved with operation. If this Grill is used in
a commercial or rental installation, it is the responsibility of the purchaser to check with the local
codes for properly acquainting users with the safety precautions and instructions.
Failure to comply with the precautions and instructions provided with this Grill can result in death,
serious bodily injury and property loss or damage from hazards of fire, explosion, burn, asphyxiation,
or carbon monoxide poisoning. Be sure you understand all operation instructions before attempting to
operate or service this heater.
1. Assembly
The assembly of this heater requires basic mechanical skills. Proper assembly is the responsibility of
the purchaser. All service and repairs should be done by a qualified person.
Tools required for assembly are:
Phillips Screwdriver / Drill with Philips bit.
Crescent Wrench
1.1 Unpacking
Carefully remove the all parts from the box. The paint on the Grill is not fully cured until after you fire
the unit on its initial firing, so use care when handling uncured painted parts.
Lay out and identify all remaining parts. (Next Page)