Wood’s AD series User Manual - page 9
9
English
Trouble
Cause
Solution
The unit
doesn’t work
Is the power cord connected?
Connect the unit to a power outlet
Is the room temperature over 35°C
or below 5°C?
Increase or decrease
room temperature
Is ambient humidity level below set value?
Decrease set value or choose
continuous dehumidification
The unit
doesn’t start
Is the filter blocked?
Clean or replace the filter
Is the air inlet or air outlet jammed?
Clear the blockage
No air inlet
Is the filter blocked?
Clean or replace the filter
Abnormal noise
Is the unit inclined?
Move the unit to a flat and solid
ground
Is the filter blocked?
Clean or replace the filter
Error code C1
Is the room temperature above
50°C or below 0°C?
Increase or decrease
the room temperature.
Malfunction of defrost sensor
Contact your retailer
Error code C2
Is the room temperature above
50°C or below 0°C?
Increase or decrease
the room temperature.
Malfunction of humidity or
temperature sensor
Contact your retailer
Error code C8
Refrigerant leakage
Contact your retailer
Trouble shooting
If you are having trouble with your Wood’s product, please refer to below trouble shooting.
If nothing of the below works, please contact your retailer for servicing of your product.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your us device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.