1. DL manuals
  2. Wood Stone
  3. Oven
  4. BISTRO 3030
  5. Installation And Operation Manual

Wood Stone BISTRO 3030 Installation And Operation Manual

Manual is about: Stone Hearth Cooking Appliance Gas-Fired

Summary of BISTRO 3030

  • Page 1

    Installation and operation manual woodstone-corp.Com revised february 2015 doc no: m0027.02 wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 usa t. +1.360.650.1111 f. +1.360.650.1166 bistro 3030 ws-bl-3030-rfg-ce bistro 4343 ws-bl-4343-rfg-(w)-ce bistro 4355 ws-bl-4355-rfg-(w)-ce cu...

  • Page 2

    2 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce, bl-rfg-w-ce, revised february 2015. Doc no: m0027.02 info@woodstone-corp.Comor visit woodstone-corp.Com wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 usa t. +1.360.650.1...

  • Page 3

    This appliance is for professional use by qualified personnel. This appliance must be installed by qualified persons in accordance with the regulations in force. This appliance must be installed with sufficient ventilation to prevent the occurrence of unacceptable concentrations of substances harmfu...

  • Page 8

    ! Warning: do not pack required air space (clearance) with insulation or other materials. When non- combustible building materials contact the body of the oven, the clearances to combustibles are transferred to those non-combustibles. ! Warning: installation and servicing of this product could expos...

  • Page 9

    Bistro model 3030 203 mm (8") o d duct collar bistro models 4343/4355/rec-8 254 mm (10") o d duct collar wood stone ovens should be vented in accordance with pertinent national, regional and local codes concerning such appliances; check venting plans with the authority having jurisdiction before p...

  • Page 10

    Moving the oven 10 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce, bl-rfg-w-ce, revised february 2015. Doc no: m0027.02 info@woodstone-corp.Comor visit woodstone-corp.Com wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 us...

  • Page 11

    11 bistro ce installation and operation manual lifting the oven 1. Use a forklift or other suitable lifting means to set the oven body onto 4x4" blocks oriented as shown refer to disassembly section of manual for disassembly instructions oven cut- away view showing right pickeye insert of lifting ...

  • Page 12

    12 bistro ce installation and operation manual lifting the oven 6. Attach strap to the clevises at the top of each pickeye insert using an appropriate hoist or lift, tilt the oven on its back, onto 4x4" blocks 7. Change the position of the clevises to the lifting holes on the crosspiece and attach...

  • Page 13

    13 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce, bl-rfg-w-ce, revised february 2015. Doc no: m0027.02 info@woodstone-corp.Comor visit woodstone-corp.Com wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 usa t. +1.360.650....

  • Page 14

    Follow these instructions only if the oven was shipped disassembled, or disassembled to move through a narrow door or passageway. The oven must be installed on a flat level surface the weight of the oven is carried by the full perimeter of the oven stand if it is necessary to shim the oven for lev...

  • Page 15

    3. Using a forklift or other suitable lifting device, carefully lower the body of the oven on to the stand so that the bolt holes line up while supporting the oven with the lift, install the 10 mm x 25 mm (3/8" x 1") carriage bolts use the washers provided and tighten all nuts securely be sure to...

  • Page 16

    5. Remove the shipping panel from beneath the oven the shipping panel is secured with 2 screws in the front, and 2 screws in the back discard the shipping panel 6. Attach the control box to the oven using (4) 1/4-20 screws the control box should be oriented so the knob is on the left side of the...

  • Page 17

    7. Connect burner assembly components and thermocouple at the rear of the control box plug in thermocouple wire here. Remove the lower control box cover. Route the igniter wire through this hole and plug it into the terminal marked “spark” on the ignition module. Attach flexible pilot tube here. Ti...

  • Page 18

    10. Place the mantle faceplate cover over the open area under the top of the mantle install the cover plate using the screws provided (3 for bl-3030_ce and 4 for bl-4343-ce or bl-4355-ce) 18 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce...

  • Page 19

    If the oven has been supplied with a granite mantle, affix the granite slab to the mounting bracket using the silicone adhesive provided 11. Run a bead of silicone (provided) along visible joints where the mantle and the oven intersect—in the front and on both sides (right side not shown) 12. Rein...

  • Page 20

    Scope of approvals i 2h(20) for use in at, dk, es, fi, ie, it, pt, gb, se, ch, gr, ee, lv, si, cr, sk and cz i 2e(20) for use in: de and pl i 2l(25) for use in: nl and hu i 2ell(20) for use in: de i 3+(28-30/37/50) for use in: be, es, fr, ie, it, pt, gb, cr, gr, ch and cy gas supply and pressure i 3...

  • Page 22

    Important: it is the responsibility of the installer to determine the best location for electrical and gas service to enter the stand enclosure of the oven, and to create the necessary aperture(s) for this entry gas and electrical routing to this appliance should be provided in a manner consistent ...

  • Page 23

    Storage box installation installation of optional storage box on bl-4343-ce, bl-4355-ce and cs-rec-8-ce models (does not include bl-3030-ce) file location: \\woodstone.Net\dfs\cad\0_ovens\z_be na_prelim\bistro_box\ws-bl-4343.Dft rev: date: part #: bistro commercial series - 4343 6/11/2013 bena dwn b...

  • Page 24

    Controller functions on/off button press to turn oven on and off temperature units press and hold to switch between fahrenheit and celsius hearth temperature the floor (hearth) temperature will be displayed when the oven is turned on sensor is embedded 1" below hearth surface display will read “...

  • Page 25

    Initial oven start-up important: if at any time you feel that either or both of the burners are not operating properly, turn the oven off and call for service before servicing, disconnect the electrical supply at the breaker and turn off the gas supply at the appliance’s individual gas shutoff valv...

  • Page 26

    For more information regarding flame height control, go to the resource center section of our web site at: www.Woodstone-corp.Com flame height index scale flame height control knob flame height indicator comprised of two parts daily oven operation the floor temperature is continuously displayed by t...

  • Page 27

    Detailed daily oven operation important: if at any time you feel that the burner is not operating properly, turn the oven off and call for service. Before servicing, disconnect the electrical supply at the breaker and turn off the gas supply at the appliance’s individual gas shutoff valve. In the ev...

  • Page 28

    Oven interior wood stone recommends the use of long-handled brushes for sweeping up surface debris that will accumulate on the floor of the oven during use use a natural fiber brush—always brushing away from the radiant burner well for deeper cleaning, use a brass bristled brush the oven floor ca...

  • Page 29

    Note: only rfg-w models are intended to allow the additional burning of wood. All gas-fired models that include a “-w” in the model number are listed to allow the burning of up to 6 8 kg (15 lbs) of wood per hour for flavor, but must be vented as solid fuel equipment do not over fire the oven. Wood...

  • Page 30

    As with all commercial cooking equipment exhaust systems, a regular inspection and cleaning schedule is needed to prevent the possibility of a hood or duct fire the frequency of inspection and cleaning will depend on hours of use and type and quality of wood used as fuel only use hardwood species ...

  • Page 31

    31 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce, bl-rfg-w-ce, revised february 2015. Doc no: m0027.02 info@woodstone-corp.Comor visit woodstone-corp.Com wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 usa t. +1.360.650....

  • Page 32

    Cause / solution controller will not turn on 1. Incoming power to oven turned off check circuit breaker for circuit supplying the oven check that any wall switches external to the oven that control oven power are turned on check that any interlocks external to the oven are turned on 2. Check for...

  • Page 33

    Ws-bl-3030, ws-bl-4343, ws-bl-4355 and cs-rec-8 ce models 33 an ongoing program of product improvement may require us to change specifications without notice. Bl-rfg-ce, bl-rfg-w-ce, revised february 2015. Doc no: m0027.02 info@woodstone-corp.Comor visit woodstone-corp.Com wood stone corporation 180...

  • Page 34

    Wood stone warrants its equipment to the original purchaser against defects in material or manufacture for a period of one year from the original date of purchase, subject to the following exclusions and limitations. Contact your local distributor for warranty service exclusions the warranties provi...