Wood Violin Cobra Cello Instruction
PLEASE READ BEFORE PLAYING INSTRUMENT
Instructions for the Proper Care and Handling of
THE COBRA CELLO
Welcome to the elite growing family of Wood Cobra Cello owners! You are now participants in
a vision that is sure to affect the string world at large. This instrument was made entirely by
hand and each instrument has its own personality. Feel free to keep in touch as your thoughts
and suggestions are valued and welcomed. Also, I would love to hear the different types of
playing styles on all of these instruments so please send recordings (and pictures!).
IMPORTANT: I personally play and fine-tune every instrument we sell to conform to my high
standards; however, since each player has their own approach to playing their instrument, you
may find you have your own preferences regarding string action, nut spacing, bridge height,
etc. Feel free to do any fine-tuning yourself as long as you use a professional repair shop to
make these minor adjustments.
VERY IMPORTANT: When unpacking cello, be careful of the bridge. I pack all my
instruments with strings tightened just enough to show you where the bridge is supposed to
be. Please make sure that you don't overtune the instrument because the strings will pop from
too much tension. If bridge has fallen or shifted for some reason, there are small indents in the
body where the feet of the bridge should be placed.
ALSO VERY IMPORTANT: Be sure to visit the Wood Violins message board online
(www.woodviolins.com/wvmb) - it is packed with all sorts of great information relating to
electric strings – from equipment choices to music discussions, we have players from all over
the world networking and contributing their thoughts and ideas.
REALLY IMPORTANT: DO NOT DISCARD THE PACKING BOX AND PACKING
MATERIALS - STORE IN A SAFE, DRY PLACE.
1. Put on shoulder harness first, then attach the included pieces (located in pocket of
soft gig bag) that hold the ball joints to the harness. It’s best to start with the two
medium-length attachments and then adjust accordingly to suit your preference. Loosen
the top holder a little bit, just enough to fit the ball joint. Insert the top ball joint on the
back of the cello into the top holder and tighten a little bit. Then insert the lower ball joint
into the lower holder and tighten just a little.
2. Position the angle of the cello to your liking, and completely tighten the holders around
the ball joints.
P.O. Box 2074 • Port Washington, NY 11050 • USA
Phone: 1-516.767.6677 • Fax: 1-516.767.3302
E-mail: customerservice@woodviolins.com
Web: www.woodviolins.com
The most important change to the violin in 400 years