Wood Violin Cobra Cello Instruction - page 2
3. CAUTION: Be careful not to loosen up the holder too much, because the bolt and
washer will come apart! Loosen just enough to squeeze the ball joint into it.
4. When performing with an amplifier, always make sure your volume knob is all the way
up.
5. Keep an eye on your bridge. The strings will naturally slowly pull the bridge forward, so
you have to reposition the bridge by pushing it back. Make sure that the back of the
bridge (nearest the tailpiece) is at a 90-degree angle to the body of the Cobra. Be
careful of the upper part of the bridge, that’s where the piezos (pickups) are. Do not hit
or damage that area as it is very delicate. It’s a good idea to wrap the bridge in bubble
wrap (enclosed) every time you pack up the cello.
6. You should keep the harness on the cello, when staying in one place to play or practice.
When traveling, obviously, store the cello in the gig bag.
7. If you purchased a hard case for your Cobra, make sure you pack the Cobra in the gig
back first. Then put the gig bag into the hard case and situate the shoulder harness
around the outside of the gig bag. If you have a separate bow case (recommended),
put this into the hard case last.
8. Feel free to explore the instrument and make it your own. May I suggest you go to a
local hardware store and get a small wrench that fits the nut size on the shoulder
harness in case any of the screws need tightening. You can also have the nut re-cut to
your liking at a local, reputable violin shop or store if you like.
9. Always e-mail us if you have any questions. That’s what we’re here for!
10. Above all, ENJOY!!
All the best,
Mark Wood