Woodstock Shop Fox W1690 Instruction Manual - Beginning
INSTALLATION
-10-
Beginning
You can install the air cleaner unit three ways.
See Figures 4 and 5.
•
Table-Top Mount, use the rubber feet
and/or the flush mount flange brackets for
a table-top application. Refer to Page 10.
•
Hanging Mount, use the eye bolts for a high
ceiling application. Refer to Page 11.
•
Flush Mount, use the flange brackets for a wall
or low ceiling application. Refer to Page 12.
Figure 4. Air cleaner unit mounting options.
Flush Mount
Flange Bracket
Hanging Mount
Eye Bolt
Table-Top
Mount
Rubber
Foot
Keep the air cleaner unit
unplugged during all
installation procedures.
Ignoring this warning may
result in serious personal
injury to you or others!
To set up the air cleaner for table-top
operation, do these steps:
1. With the help of an assistant, carefully invert
the air cleaner unit.
2. Expose the sticky backing on the foot, and
affix the rubber foot to the bottom of the air
cleaner unit. See Figure 6.
3. Repeat Step 2 for remaining feet.
For permanent table-top mounting, refer to
the Flush Mount procedure on Page 12, and
install the air cleaner unit to the tabletop
with the flush mount flange brackets.
Table-Top Mount
You can use the air cleaner unit as a portable air
filtration system by installing the rubber feet
and placing the unit on a workbench or a table.
Figure 5. Air cleaner unit mounting hardware.
Figure 6. Rubber feet correctly installed
(Underside View).
Hanging Mount
Eye Bolt
Table-Top
Mount
Rubber
Foot
Rubber
Foot
Flush Mount
Flange Bracket
Mounting Holes
Flush Mount
Flange Bracket
Get lifting assistance
before installation. At 55
pounds, the Model W1690
air cleaner is a heavy load.