Worcester waaiu5 Operation Manual - page 8
6
BASIC OPERATION
TIPS ABOUT AUTO MODE
(Example: 1°C higher)
C
(Example: 2°C lower)
C
2
5
3
1
4
1
Press the MODE button to select the
operation mode.
AUTO
HEAT
COOL DRY
2
Press the ON/OFF button to start
operation.
• The green OPERATION lamp (
) on the
unit will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed in 1°C in-
crements within the range of 2°C higher to 2
°C lower from the temperature automatically
determined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO
SOFT
LOW
HIGH
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The green OPERATION lamp (
) on the
unit will turn off.
In the AUTO mode, the temperature setting and
mode are automatically selected according to
the room temperature and outdoor temperature
when the unit is turned on.
Modes and Temperature Settings
The fi gures in ( ) are temperature settings
During operation, if the outdoor temperature
changes, the temperature settings will auto-
matically slide as shown in the chart.
MODE CHANGEOVER
During seasons when you need COOLING at
daytime and HEATING at night, or if the room
temperature should become extremely higher
than the temperature setting, due to supple-
mentary heating equipment, the mode will au-
tomatically switch between HEAT and COOL
mode to keep the comfortable room tempera-
ture.