World Tech Toys 33805 Instruction Manual - page 3
of
4
OPERATING DART BLASTER
DISSASEMBLING DART BLASTER
LOADING DART BLASTER
Pull back the slide all the way to
ready the dart blaster.
Untie bow string on both sides of
bow and remove from dart blaster.
To remove bow pieces push down
on release slide as shown and pull
straight out of slot for both sides.
Pull the trigger to fire the loaded
blaster dart. Pull back slide again
to ready next dart.
Load 4 darts into the blaster as shown. To avoid damage to
darts and/or blaster, do not force dart all the way in. About 1/4
of dart should stick out of barrel. Each chamber will fire in
succession from top to bottom.