X-cam GSM110 User Manual - page 4
Launch the X-CAM Gimbal Stabilization Module Assistant , choose the correct port number and click CONNECT
BEEP BEEP will be shouted after the connection succeed, the parameters will be read out automatically.
The parameters as below:
1. Gains
There are 2 gains, Position Gain and Acceleration Gain
Pos. Gain: Inclined the gimbal to one position slowly and watch the image is horizontal or not, if not just adjust the Pos. Gain.
Acc. Gain: After adjusting the Pos. Gain, Inclined the gimbal to one position quickly and watch the image is horizontal in time, if not just
adjust the Acc. Gain.
2. Gimbal Control
The module provides 2 ways to control the TILT, Linear Mode or Tracking Mode
Linear Mode: Push the TILT stick to high or low for moving the camera mount to up or down until the stick back to midpoint
Tracking Mode: Push the TILT stick to high or low, the camera mount will follow the stick position.