1/2.8” SONY COLOR CMOS OSD CAMERA
2.0 Mega Pixel Full HD Series
The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.
▲ Before attempting to connect this product, please read and keep this
manual for future use.
1. Do not open the cover, it may cause electric shock. Ask a qualified
service person for maintenance when you encounter any problems.
2. Install the camera away from TV, radio transmitter, magnet, electric
motor, transformer, audio speakers because the magnetic fields
generated from above devices will distort the video image.
3. Place the camera on a solid base. Install the camera away from
stoves or other heat generating devices as the high temperature could
cause deformation, discoloration or other damages to the camera.
Install the camera at where the temperature range does not exceed
-10°C to 50°C (14°F to 122°F)
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is interned to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.