Summary of 590 RB
Page 1
User’s manual for 590 rb cycle built for health.
Page 2
Safety instructions to ensure the best safety of the exerciser, regularly check it on damages and worn parts. • if you pass on this exerciser to another person or if you allow another person to use it, make sure that that person is familiar with the content and instructions in these instructions. • ...
Page 3
1 important notes • assemble the exerciser as per assembly instructions and be sure to only use the structural parts provided with the exerciser and designed for it. Prior to the assembly, make sure the content of the delivery is complete by referring to the parts list of the assembly and operating ...
Page 4: Explosive Drawing
2 explosive drawing 3 84 14 23 24 83 63 27 64 28 29 65 85 77 17 53 21 79 19 54 36 52 57 41 39r 37 38 51 68 67 34 20r 39l 20l 61 16 35 66 9 45l 12 11 31 2 55 8 45 r 70 13 11 31 1 60 56 15 66 25 74 80 75 7 40 4 15 66 66 11 5 13 11 31 18 30 66 11 12 44 31 11 12 13 71 27 22 43 6 78 46 49 50 48 10 42 47 ...
Page 5
3 picture of spare parts d22xd8.5 d15.4xd8.2 m8x20l 13 11 31 m8x90l m8x75l m8x55l m8x15l d16x1.2t m8*40l x12 x4 x2 x2 x8 x16 x8 x20 x12 56 30 55 15 12 66 8 2 60 3 1 13 6 18 7 50 25 4 10 5 13 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1.
Page 6
4 part list part no. Description specifications q'ty 1 main frame 1 2 front stabilizer d60x1.5tx390l 1 3 rear stabilizer 1 4 seat tube set 1 5 handlebar set 1 6 seat adjustable tube set 1 7 seat support tube set 1 8 computer um-6636l2-7 1 9 foot cap (round) d60x71x101l 2 10 handlebar post set 1 11 s...
Page 7
5 46 middle hand pulse cable 550l 2 47 upper hand pulse cable 700l 1 48 lower hand pulse cable 50l 1 49 hand pulse cable 700l,rolling cable 1 50 adaptor output：6v 1 51 crank bearing welding set 1 52 bushing d20*d14*11.5t 1 53 fixing plate for idle wheel 156*62.2*5t 1 54 idle wheel d23.8xd38x24 1 55 ...
Page 8
6 assembly step 1 fig.1 x 4 13 11 31 3 d22 d15.4 m8x20l 1 assemble rear stabilizer (3) to main frame (1) use spring washer (11), inner allen bolt (13) &curved washer(31)..
Page 9: Step 2
7 step 2 fig.2 x 2 down up down up x 2 55 30 31 11 12 31 11 12 d15.4 d15.4 m8x90l m8x75l d22 d22 m8x15l m8x15l 6 2 30 55 assemble front stabilizer(2) to the main frame use spring washer(11),inner domed nut(12),curved washer(31)&square neck bolt(35).And then assemble the seat adjustable tube set(6) t...
Page 10: Step 3
8 step 3 x 4 fig.3 15 66 18 m8*40l d16 60 40 7 7 assemble the seat (18) to the seat support tube set (7) use inner allen bolt (15) &nylon nut (66). Then assemble the sliding beam set (60) to seat support tube set (7) use ball pulling knob (40)..
Page 11
9 step 4 fig.4 x 4 60 56 66 11 12 d15.4 d16 m8x55l m8x15l 47 47 assemble two middle hand pulse cable (47) together. Then assemble sliding beam set (60) to the main frame(1) use spring washer(11),inner domed nut(12),square neck bolt (55) & nylon nut (66)..
Page 12
10 step 5 x 4 fig.5 66 11 13 m8x20l d15.4 d16 5 4 7 assemble handlebar set (5) to seat tube set (4) use spring washer (11), inner allen bolt (13), & nylon nut (66) ,and assemble seat tube set (4) to seat support tube set (7)..
Page 13
11 step 6 fig.6 x 4 25 4 15 66 13 11 31 46 47 41 42 x 4 m8x20l d15.4 d22 d16 m8*40l 10 assemble back pad (25) to seat tube set (4) use inner allen bolt (15) & nylon nut (66). Connect upper computer cable (41) and motor cable (42) also connects middle hand pulse cable (46) & upper hand pulse cable (4...
Page 14
12 step 7 a c fig.7 46 41 20r 20l b 47 48 8 75 6 49 assemble the computer(8) and pedals (20l&r). A, connect upper hand pulse cable (47) and lower hand pulse cable (48) together. B, assemble the front cover (75) to seat support tube (6).C, plug hand pulse cable (49)..
Page 15
13 step 8 fig.8 50 plug the adaptor (50)..
Page 16
14 the handlebar and the back pad is adjustable..
Page 17
15 english manual for um6636l2-7 description this product is used um series motor system. 1. Power on the beeper beeps a long sound after plug in adaptor ( 6v, 1000ma), and all lcds are lit up for 2 seconds, then it enters initial workout mode. Function scan : alternates between watts/calories and r...
Page 18
16 2. Select manual/programs/ watt constant/user/h.R.C user can choose different control mode to start his work out. See below is main description of each control mode. 3. Execute manual/programs/ watt constant/user / h.R.C execute selected control mode. 4. Pre-set time/distance/calories/watts/heart...
Page 19
17 recovery when you have finished your workout, press recovery. For recovery to function correctly, it needs your heart rate input. Time will count - from 1 minute and then your fitness level from f1 to f6 will be displayed. Note: during recovery, no other displays will operate. F 1 ~ f6 = recovery...
Page 20
18 important information regarding service in you have any problems, please contact mylna service. Our consultants have extensive experience and will help you with questions about products, installation, ordering spare parts or any errors and omissions. We would like you to contact us before contact...