Conceiver series mgp4e 081915 u in case of any question, please contact your x-loupe ® distributor, or e-mail：x-loupe@lumos.Com.Tw mpg4_plus user guide disclaimer ． thank you for using this product. While every effort has been made to ensure that the information contained in this guide is accurate a...
- 1 - precautions .............................................................................................................. 2 about “x-loupe® mightygetter (mgp4_plus)” ................................................... 4 components .................................................................
- 2 - warnings please ensure that you read and understand the safety precautions before using. Precautions to avoid the fire, electric shocks, or result in a body severe injury, please obey the following instructions. 1. Keep x-loupe® and its accessories away from children and infants.Contact a doct...
- 3 - x-loupe® is protected by the following patents:(up to 2015/08 ) in the interest of continually improving products, lumos tech. Reserves the right to update or modify information contained in this manual without prior notice. Product image of this manual is for reference only and actual product...
- 4 - about “x-loupe® mightygetter (mgp4_plus)” thank you for your purchase of x-loupe® mightygetter ( mgp4_plus) to take latent print /fingerprints. This trailblazing tool is with built-in dual led ring light in lens, sustained and stable high-brightness for feature, it provides the fixed working d...
- 5 - components interchangeable 30x object lens for latent print / fingerprint capture front of module pogo pin (female) led illumination control on off mount adapter on (red dot) / off switch.
- 6 - components l-square ruler sticker battery cassette with the ruler-side inward. (see page 10 for function and operating.) back of module.
- 7 - light source the two illumination positions make the lights are perpendicular to one another. While the object surface is reflective, switch to (side), do not use the (core). Protection filter see last page supplement for mounting and removing. Slide switches shiny surface shiny surface core l...
- 8 - product assembly 1 mounting the lens on module (1) get the lens and align the pogo pin -3 pin male header and 3 bolts on the rear of lens- a , into the pogo pin female header and 3 notchs- b on lens mount of module (fig. 1 ), then attach the lens to module. (2) rotate the lens spiral tooth clo...
- 9 - 2 mounting the module with camera (1) align the red positioning mount dot on the mount ring (at the real of module) with the red dot above the camera mount.(fig. 1 ) (2) attach module to camera and turn 30 degrees clockwise, until both bodies are completely stable union.(fig. 2 ) (3) turn on t...
- 10 - 3 steps in positioning and bonding of l-square ruler (1) have the lens cleaning cloth placed on the table (to avoid a rub of camera lcd screen), then set the assembled finished mgp4_plus upright on; the way holding camera as shown in figure 1. (2) make sure the light setting switched on w & c...
- 11 - oblique image rectification if the image of l-square ruler is slanted, with the left point finger to hook into the ruler while adjust the image. (the scale line of ruler should along the edge parallel to frame of screen). (6) once the l-ruler is close to the screen frame which look like a dou...
- 12 - 4 accessories instructions for use the following items, except 2 is recommended to be used, others for your choice whether to use, does not affect the overall function of mgp4_plus. Items usage lens cover strap for the lens cover stay with the camera to prevent loss. ► attach the long loop en...
- 13 - attention/warning for the battery charging please use the included charger to charge the battery and go by following steps to charge the battery (1) align the ▲marks on the battery and charger, then insert the battery by sliding it in 1 and down 2 . (2) plug the battery charger into the power...
- 14 - notice and preparation for micro-photography 1 x-loupe® basic setup before using after assembling, do the following check procedures before shooting. (1) loaded and ready the battery and memory card into the camera. (2) select the lens as desired and assemble it onto the x-loupe® module. (3) ...
- 15 - all the settings of camera collocated with the x-loupe® have been altered to meet the micro-photography prior to its shipping. Afterward, if there’s any setting changed, please refer to the following setting list. (1) adjust the zoom to its maximum optical value for micro-photography. (2) man...
- 16 - settings supplement lowering the iso speed results in crisper images. Raising the iso speed results in a faster shutter speed, reducing camera shake, but the images will appear rough. Therefore, get the setting on iso 80/100, not over iso 400 for the micro-photography. Press the button , choo...
- 17 - tips: *1. For inspection purpose, the bigger digital zoom you use the less picture quality you get. However, it helps user to view the subject in an easy way. For micro-photography purpose, suggest using optical zoom only in order to have better picture quality, and check the file with larger...
- 18 - troubleshooting (1) about the troubleshooting of camera, please refer to the camera user guide. (2) the built-in led of lens barrel is not bright (3) error code shown on camera display- the lens barrel of camera can not stretch out or retract (4) could not see the full field of view on the ca...
- 19 - (6) the battery is fully charged, but lasts for shorter and shorter time: the lithium battery can only be recharged for certain amount of times, but it will eventually wear out. Please purchase a new battery from your local distributor. (7) hardware malfunctions such as slipped power switch o...
- 20 -.
- 21 -.
- 22 -.
- 23 - ‧ supplement for page 7 protection filter (for blue light) the magnetic slot-in filter is easy and quickly for you to drop it into the holder. Subtract the filter, as show, hold the barrel then quickly, vigorously but carefully to smack the barrel onto another palm, so that the filter will dr...
- 24 - memo.
Conceiver series mgp4e 081915 u in case of any question, please contact your x-loupe ® distributor, or e-mail：x-loupe@lumos.Com.Tw mpg4_plus user guide disclaimer ． thank you for using this product. While every effort has been made to ensure that the information contained in this guide is accurate a...
