X-Loupe Conceiver series MPG4 PLUS User Manual - page 10
- 16 -
- 17 -
Notice and Preparation for Micro-Photography
(3) Press the MENU button. There are menu
items ( / ) organized under tabs.
Set the mode switch to and the camera
is in P mode. Then follow the function
setting below.
Tips:
*1. For inspection purpose, the bigger digital zoom you use the less picture quality you
get. However, it helps user to view the subject in an easy way. For micro-photography
purpose, suggest using optical zoom only in order to have better picture quality, and
check the file with larger magnification on the LCD monitor.
*2. If the【AF Frame】is in【Center】, it will not appear magnified if the camera cannot
focus.
The Setting based on Canon PowerShot ELPH 100 HS/
IXY Digital 210 F is for reference and revision, and other type as well
(1) Move the zoom lever toward , the sign of
4X for its maximum optical value should show
up on LCD monitor.
(2) Set the mode switch to . After pressing
the button, press the buttons to
choose P; then press to set the P Mode
as the Manual Mode (Refer to Camera User
Guide p.64)
Exposure Compensation
Macro
Display
Flash
Settings Instruction
Adjusting the Brightness - Enter Exposure Compensation mode.press the
button; press the , set to ±0, then press the button.
(Camera User Guide Page.85)
Press the button ,choose , then press to turn the Flash off.
Do Not start the Macro shot Mode.
Switching the Display-You can also switch the display by pressing the button
while the image displays right after shooting
MENU
Suggestion
setting
MENU
Suggestion
setting
AF Frame
Center
i-Contrast
Off
AF Frame Size
Normal
Review
2 sec.
Digital Zoom
Standard
*1
Review Info
Off
Magnifying the Focal Point
On
*2
Blink Detection
Off
AF-Point Zoom
Off
Grid Lines
Off
AF-assist Beam
Off
IS Mode
Continuous
Flash Setting
――