X-Micro XWL-11GPRG Quick Start Manual - page 2
Note2: To prevent potential problems during installation, please use the
auto-run installation tool on the CD to finish the driver installation before you
plug the X-Micro WLAN 11g PCMCIA Card into the computer.
INSTALLATION UNDER WINDOWS 98
Step 1. After you install Utility, Hold the PCMCIA Card with the logo facing
up, and insert the card into the slot, applying just enough pressure to make
sure it is fully seated. Windows 98 automatically detects the PCMCIA Card,
briefly opens a New Hardware Found window, and starts collecting
information for a driver information database. When Windows 98 is ready to
configure the new hardware, it opens the Add New Hardware Wizard dialog
box as shown, Click Next.
Step 2. A dialog box appears asking what do you want Windows to do.
Select Search for the best driver for your device (recommended) and click
Next.