X-TREME X-400 Product Handbook - page 12
Page12
Fig. 15
Fig. 16
MAINTENANCE SCHEDULE
Proper care of your X-Treme X-400 will insure optimal performance and longer
life span. The following are a few maintenance suggestions that will keep your
X-Treme X-400 running in top condition:
Daily Maintenance
Perform each time you ride your X-400
Clean the exterior of the unit with a soft, damp rag.
Check that all nuts and bolts are securely tightened.
Lubricate the chain with any silicone spray, 3&1 oil or any good
clean motor oil.
Check battery charger for any frayed/cut wires.
OTHER QUESTIONS
For additional questions, service instructions, further information and important
phone numbers, please go to the X-Treme website at www.x-tremescooters.com
Thank you for purchasing an X-Treme X-400 and please tell your friends how much fun
you’re having on the X-Treme X-400
To tighten the chains:
Slightly loosen the two axle bolts on both
sides of the rear wheel. (Fig.15). Then slowly
adjust the two adjusting screws on each side
of the rear tire (Fig.16) until chain reaches the
proper tension.
Rotate the rear wheel to make sure
the chain is aligned.
Finally, lock and tighten the rear
axle bolts prior to riding.