X-TREME X-400 Product Handbook - page 7
Page7
PACKAGE CONTENTS
Your X-Treme X-400 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme X-400 Scooter
2. 36V Battery Charger
3. Tool Kit
4. Product Handbook
5. Seat & Seat Post
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-400
Fig, 1
Fig. 2
Fig. 3
Assembly
1. Carefully remove the X-400 from the box.
2. To unfold the X-400, begin by lifting up on
the FOLDING HANDLE CLAMO with one
hand (Fig.1), while gently pulling up on the
handlebars with the other (Fig.1)
3. Secure the handlebars in the upright
position by tightening the handlebar-folding
clamp. Fig. 2
4. Assemble the T-Handlebar by inserting it
into the handlebar post. Fig. 3
5. Secure the T-handlebar to the post by
tightening the clamp at the desired position.
This setting is adjustable if required. Fig.
3
6. Insert the assembled T-Handlebar into the
Front Fork as shown in figure 4.
7. Tighten the bottom handlebar clamp using
the appropriate tools as shown in figure 5.
8. Insert the seat into the silver seat post and
tighten the nuts securely.
9. Insert the assembled seat and seat post
into the seat post as shown in figure 6.
10. Finally insert the seat post into the seat
post receiver in the frame and tighten the
clamp. Fig. 7