X-TREME XM-3150 Operation And Maintenance Instructions - page 10
10
Accelerating and Braking
Throttle Tips
1. Turn the key to the ‘ON’ position, then turn the Throttle gradually to accelerate.
2. To avoid losing control of your scooter, please turn the Throttle slowly until the
speed increases.
3. Do not turn the throttle until you are ready to ride.
4. After braking, make sure the throttle has been released back to the start position,
release the brake levers and turn the throttle gradually to move again.
5. The brushless motor makes a small electromagnetic noise when turning the
throttle to start. This is normal.
6. Please, for your safety and security, take the key out when you are not riding.
Braking Tips
1. To stop, release the throttle and apply the front and rear brakes simultaneously.
2. For safety, this scooter has a circuit brake system. When the front and rear
brake is applied, the controller will disable the circuit; release the throttle back to the
start position, release the front and rear brakes to enable acceleration again.
Tips for better economy (range)
1. Accelerate slowly and smoothly. Avoid hard acceleration.
2. Avoid sudden braking by attempting to anticipate your need to brake ahead of
time.
3. Release the throttle and just roll along without using any power where possible.