X10 JR20A Owner's Manual - page 11
2 1
2 1
2 1
2 1
2 1
2 0
2 0
2 0
2 0
2 0
Note that the mouse pad and the
buttons on the back of the remote are
always active, no matter what mode the
remote is in (PC, TV, VCR, etc.). Note
however that the special function buttons
(WEB, PHONE, CD, DVD) are only
active after the PC button has been
pressed. Note also that the mouse
cursor will move faster as you press
harder on the mouse pad. It actually has
three distinct speeds.
Note also that speed, mouse trails, etc.
can be set from the Remote Mouse
Properties Sheet in the Control Panel.
Normally you will configure the Mouse
Remote’s buttons by clicking on the Tray
icon (Windows 95) and then clicking
Configure. If the tray icon is NOT visible
in the system tray (because you closed it)
Select Start, then Programs, then Remote,
then Remote Mouse Buttons, to again
show the Remote Mouse tray icon. Click
on the tray icon then click Configure.
Alternatively: If the tray icon is NOT
visible a Configure button will be
available in the properties sheet (in the
Control Panel) allowing you to configure
the Mouse Remote Buttons from there. If
the tray icon IS visible in the system tray
there is no Configure button in the
Properties Sheet, so the Mouse Remote
Buttons can be configured by clicking on
the tray icon and then selecting
Configure.
There is extensive on-line help available
for the Mouse Remote software, so it is
suggested that you refer to this help for
more details. Note also that information
on what each button does is available
with the right-click of the mouse.
TTTTT
YPICAL
YPICAL
YPICAL
YPICAL
YPICAL
A
A
A
A
A
PPLICA
PPLICA
PPLICA
PPLICA
PPLICATION
TION
TION
TION
TION
S
S
S
S
S
CENARIO
CENARIO
CENARIO
CENARIO
CENARIO
Here’s a typical scenario that gives you
an idea of what you can do with the
power of the Mouse Remote:
Program 10 WEB sites into the numeric
keys (e.g. 1 for www.x10.com, 2 for
www.orcaweb.com...), then sit back in
your armchair and press the PC key
followed by the WEB key to launch your
WEB browser. Then position the cursor
over the URL field and press 1, 2, etc. to
go directly to the address and read the
latest information from each WEB site.
Then using the channel up and down
keys and volume up and down keys as
scroll functions page through the site,
while listening to a CD that you started
playing earlier. After a while, skip back
to track 7 on the CD by pressing CD
followed by 7. Then return to WEB
browsing mode by pressing the WEB
key. Later still, as it starts to get dark,
press the X10 key and turn on the living
room lights.* Then press the CD key and
press pause while you answer the phone.
Press the Power button to close your WEB
browser and then press the PHONE
button that you previously configured to
dial your voice mail to pick up messages
on your PC.
To configure the above:
Click the tray icon and select Configure.
Click the PC button then double-click the
WEB button, then click Launch. Type in
the name of your browser, or Browse to
find its location. Click OK twice.
Click the PC button, then double-click
button 1. Click WWW, then type the
desired WEB address. Click OK. Repeat
the process for each address you want to
program for each numeric button.
Click PC, then CD, then double-click
Play. Click Multimedia. Select your media
device and function (Play). Repeat the
process for Stop, Pause, FF, REW, MUTE,
numeric keys, etc.
Get the idea?
* Required X10 Transceiver and Modules
(sold separately).