Digital uhf wireless system model xds95 users guide includes easy setup instructions for single and multi- system operation digital wireless systems x2 digital wireless systems 4630 beloit drive, suite 20 sacramento ca 95838 u.S.A. Phone: (916) 779-1040 fax: (916) 779-1041 web site www.X2digitalwire...
Xds95 owners manual version 1.1 december 11, 2006 9:30 am.
...................................... 1 ................................................................................. 1 ........................................................................... 1 .......................................... 2 .......................................................
Created specifically for performing and recording musicians who demand to be untethered without compromising their sound, the xds95 24-bit digital wireless system delivers your tone and performance with the sound and feel of a direct wire connection. X2's proprietary digital technology provides supe...
Led display • see system setup on page 3. 1/4” mono/stereo output • see system setup on page 3. Power switch • press once to turn the power to the receiver on, and once more to turn the power off. 3 5 1 ac adapter jack (adapter is optional) • 9v 300ma mode/channel select button • see system setup on...
Power up procedure press on/off button to turn unit on. Leds will cycle blue-red- blue on power up sequence. Once unit is powered on the unit will display current channel number with a blue led and bat- tery life with a red led. The unit will automatically scan for your digital rf signal. This is in...
Power up procedure press on/off button to turn unit on. Leds will cycle blue-red- blue on power up sequence.Once unit is powered on the unit will display current channel number with a blue led and bat- tery life with a red led by continuously toggling between the two leds. As the user inputs audio i...
Multi-system operation up to five systems can operate simultaneously. In situations where it is necessary to have more than one person wireless, each transmitter and receiver combination must be set to the same channel. Set the first system to transmit and receive on channel “one”, the second sys- t...
Symptom cause solution no sound system not turned on. Improper connection or improper channel selection. Check that the system is powered on. Check that the transmitter and receiver are set to the same operat- ing channel. Check that the receiver is receiving data. Check that the source is operating...
Overall system specifications transmission format: x2 proprietary digital audio transmission frequency response: 20 hz - 12 khz audio dynamic range: >117 db distortion: 0.03% thd rf carrier frequency: 902 mhz to 928 mhz, fsk selectable frequencies: five rf output power: 10mw audio output level: unit...
? 2006 x2 digital wireless systems, inc. All rights reserved. Q-diversity™,frequencyclear™ and digiscan™ are trademarks of x2 corporation. Xds95 patents pending..
