X2 Digital Wireless Systems XDS95 User Manual - Specifications
Overall System Specifications
Transmission Format:
X2 proprietary digital audio transmission
Frequency Response:
20 Hz - 12 kHz
Audio Dynamic Range:
>117 dB
Distortion:
0.03% THD
RF Carrier Frequency:
902 MHz to 928 MHz, FSK
Selectable Frequencies:
Five
RF Output Power:
10mw
Audio Output Level:
Unity gain with transmitter input
Polarity:
Positive voltage at input yields positive voltage at output
Transmission Range:
>150 feet line-of-sight (may vary due to local conditions)
FCC Approval:
Part 15 approved, no user-license required
XDT1 Transmitter Specifications
A/D Conversion:
24-bit Delta Sigma, 128 times over sampling
Input Impedance:
1.3 MΩ
Connectors:
1/8" Unbalanced locking connector
Controls:
Power On/Off, Channel Select
LED Display:
Five segment - Power On, Channel, Battery Life, Audio
Level Meter
Dimensions:
2.4" W x .66" D x 4" H
Battery Life:
Switching power supply, ~12 Hours (9v alkaline)
Weight:
.25 lbs (with 9v battery installed)
XDR1 Receiver Specifications
D/A Conversion:
24-bit Delta Sigma, 128 times over sampling
Output:
2.12V RMS (Unbalanced: 1.8KΩ)
Connectors:
1/4" Unbalanced stereo output, tip= instrument voicing,
sleeve= full bandwidth
LED Display:
Five segment - Power On, Data Link, Channel, Battery
Life, Audio Level Meter, RF Strength
Controls:
Power On/Off, Channel/Mode Select
Dimensions:
3.078" W x 1.17" D x 4.7" H
Power Requirements:
9V DC via battery or optional AC power supply
Battery Life:
Switching power supply, ~8 Hours (9v alkaline)
Weight:
.45 lbs (with 9v battery installed)
Specifications
7