X4-TECH CLIPSTAR Instruction Manual - System Update
Chapter15
Systemupdate
Chapter15
Systemupdate
1
System update
Therearetwowaystoupgradesystemfirmware:
1.Select„Settings›System›Upgrade“inthemainmenu
and upgrade firmware by following the instructions as
seen on display. For detailed information, please refer to
Section12:Settings›SystemSetting›Upgrade.
2.Upgradefirmwarebyusingthe„FirmwareUpgradeTool“
ontheenclosedCD.
Steps
›Toturntheplayeroff,pressandholdthe„Ñ;“button,do
notreleaseit.Nowyoucanconnecttheplayertoacompu-
terviaUSBcable.
›Aftertheplayerisconnectedyourcomputerwillsearch
for„USBDeviceinstallation“andrequiredriverinstallation.
To install, follow the instructions for driver installation as
seen on screen.(If the driver has been installed, just skip
thisstep).
›Afterthedriverhasbeeninstalled,runthe„FirmwareUp-
dateTool“withtheenclosedCD.
›Clickon„Open“andselectafirmwarefile.
›Clickon„Update“tostartupgrading.
›Afterupgradingiscompleted,exittheprogrambyclicking
on„Exit“anddisconnecttheplayerfromyourcomputer.
When the conversion progress reaches 100% and has been completed, then the file will be
successfully converted. Copy the converted file to the device, by connecting the USB cable
to the device to transfer files to the portable media player that you will now be able to
watch.
1
6. System Update
There are two ways to upgrade system firmware:
1). Select “Settings→System→Upgrade” in the main menu and upgrade firmware by
following the instructions as seen on display. For detailed information, please refer to
Section 12: Settings>System Setting> Upgrade.
2). Upgrade firmware by using the “Firmware Upgrade Tool” on the enclosed CD.
Steps:
A) To turn the player off, press and hold the “
” button, do not release it. Now you can
connect the player to a computer via USB cable.
B) After the player is connected your computer will search for “USB Device installation” and
require driver installation. To install, follow the instructions for driver installation as seen on
screen.(If the driver has been installed, just skip this step).
C) After the driver has been installed, run the “Firmware Update Tool” with the enclosed CD.
D). Click on “Open” and select a firmware file.
E). Click on “Update” to start upgrading.
F) After upgrading is completed, exit the program by clicking on “Exit” and disconnect the
player from your computer.
When the conversion progress reaches 100% and has been completed, then the file will be
successfully converted. Copy the converted file to the device, by connecting the USB cable
to the device to transfer files to the portable media player that you will now be able to
watch.
1
6. System Update
There are two ways to upgrade system firmware:
1). Select “Settings→System→Upgrade” in the main menu and upgrade firmware by
following the instructions as seen on display. For detailed information, please refer to
Section 12: Settings>System Setting> Upgrade.
2). Upgrade firmware by using the “Firmware Upgrade Tool” on the enclosed CD.
Steps:
A) To turn the player off, press and hold the “
” button, do not release it. Now you can
connect the player to a computer via USB cable.
B) After the player is connected your computer will search for “USB Device installation” and
require driver installation. To install, follow the instructions for driver installation as seen on
screen.(If the driver has been installed, just skip this step).
C) After the driver has been installed, run the “Firmware Update Tool” with the enclosed CD.
D). Click on “Open” and select a firmware file.
E). Click on “Update” to start upgrading.
F) After upgrading is completed, exit the program by clicking on “Exit” and disconnect the
player from your computer.