X4-TECH IR-1600 User Manua - Safety Information
21
GB
USER MANUAL
Safety information
Dear Customer: The following safety and ha-
zard warnings are not only for the protection
of your device, but also serve as a protection
against potential health hazards. Please take
your time to read the following instructions
carefully.
We assume no liability for personal or
property damage resulting from the failure to
comply with the safety instructions, improper
operation and handling. Under such circum-
stances, all claims under warranty will become
void.
For safety and licensing (CE) reasons any
unauthorized modification and/or change
on the device is prohibited and will void the
warranty and all warranty claims.
Any persons operating, installing, setting
up, or servicing this device must be trained
and qualified accordingly and observe these
operating instructions.
Ensure that the device has been set up accor-
dingly by following all instructions found in
the instruction manual.
This is a protection class II device. Make sure
that the voltage supply of the power outlet
used meets the required voltage specificati-
ons (230 V~/50 Hz).
Power supply cables should be routed so that
they are not likely to be walked on, squished
or pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the point
at which they exit from the device. Avoid
exposing the cable to extreme heat or cold.
Ignoring the above mentioned could result in
cable damage and present the dangerous risk
of electric shock.
Should any evident damage be seen on the
device or on the connection cables, do not
come in contact with or touch these. Switch
off the corresponding circuit breaker in the
power distribution panel first, before carefully
unplugging the power plug from the wall
outlet. Do not operate this device further!
Please contact or take it to a qualified service
technician/specialty workshop.
In order to completely cut off the power
supply to the device, unplug the power plug
from the wall outlet. Merely turning the
device off with the ON/OFF button is not
sufficient enough. Make sure that receptacles
are easily accessible.
Always pull on the plug’s grips and never on
the cable to remove from a wall outlet.
Unplug the device from the power outlet, if it
is not in use for a longer period of time.
For safety reasons, always unplug the device
from the power outlet during thunderstorms.
Eliminate potential tripping hazards by
routing cables in such a way that no one can
trip or stumble over them.
Never use the device, if the power cable or
device is damaged.
This device is not a toy and not suitable
for children. Small children are unaware
of the serious and immediate dangers
involved when exposing themselves to
or handling electronic devices. Further-
more, this product contains small parts
that could be swallowed.
Keep packaging and protective foil away from