X4-TECH SOI T8.5 Instruction Manual - page 12
22
23
button to go back to TV.
You can see the actual page number on the left side and t he
requested page number on the right side at the top of the teletext
page. The page searching is displayed on the left side.
Teletext is only available when receiving DVBT channels.
OTHER
Sound track
In digital broadcasts, multiple audio languages can be simultaneously
transmitted by the program provider. The Audio control menu appears
when the
Audio
key is pressed on the channel having different types
of sounds. You can change the desired audio language and audio mode
of current service.
This service is not offered by all channels. Teletext and subtitle information
will be available only when it is included in the transmission.
NOTICE:
Plug the earphone mini-plug into the earphone jack located on the rear side
of the set .
J. LISTENING WITH A EARPHONE
Earphone
No sound will be heard from the main unit speakers when
connecting the earphone set.
Notes:
K. TROUBLESHOOTING
Before calling for repair service,cheak the following items for possible
remedies to the encoutered symptoms.
TV set
There is no
picture or
sound.
There is no
picture or
sound,just
noise.
picture is
not clear.
The picture is
too dark.
Remote control
does not work.
picture is light
or improperly
tinted.
There is no
picture.
There is no
sound.
Problem
Check item
Make sure the AC adapter is properly
inserted in the power outlet.
Reception other than those of broadcasting
stations can be considered.
Make sure the input mode is set to TV.
Make sure the main power switch of the
main unit is on.
Make sure the colour system is right
Fluorescent lamp may have reached the end
of service life.
Make sure the sound system is right
Make sure the volume is not set to minimum.
Make sure the sound is not set to mute.
Make sure the headphone is not connected.
Make sure the antenna cable is properly
connected.
Bad reception can be considered.
Make sure the antenna cable is properly
connected.
Bad reception can be considered.
Check Contrast and Brightness adjustment.
Fluorescent lamp may have reached the end
of service life.
Check to see if batteries in the remote control
have sufficient power.
Make sure the remote sensor window is not
under strong fluorescent lighting.
Check colour adjustment.(NTSC mode)
1. Press the SLEEP key to display the sleep time screen.
2. Press the LEFT/RIGHT( / ) to set the sleep time (in minutes).
I. ADJUSTING THE SLEEP TIMER SETTINGS
The setting can be set in 10 . 20 . 30 . 40 . 50 . 60 ....... 200 .
210 . 220 . 230 . 240 minutes