X4-TECH Vision TV card Instruction manual - Installation And
10
11
Installation
Please follow the steps below, when installing the TV card:
1.Turnyourcomputeroffanddisconnectitfromitspowersource.
2.Pleaseensurethatyoufollowallstaticelectricityprecautions,topreventstaticelec-
tricityfromdamagingthecomponentsofyourcomputer.Touchametalobjectfora
momenttodischargeorwearanantistaticstripbracelet.
3.Removeyourcomputer’scasecover.(Pleaserefertoyourcomputer’susermanual
onremovingthecasecover.)InserttheTVcardintotheavailablePCIslot,makingsure
itiscompletelyandfirmlyinsertedintotheslot.
4.Replacethecasecoverandconnectyourcomputeragaintoapowersource.
5.Startyourcomputer.
Now all necessary cables can be connected to the card:
For antenna reception
1.Antennafortelevisionreception(incaseofbadweatheritisrecommendedtousean
optionallyavailableactiveantennathatcanbepurchasedseparately.).
Note: For optimal reception, we recommend using the X-TECH Active-T!
For cable reception
Thecableofyourcabletelevisionconnection.
2.FMantennaforradioreception(includedindelivery).
3.Sensorfortheremotecontrol(„Remote”connection).
Note: The sensor should be attached in such a way as to ensure visual contact bet-
ween the sensor and the remote control.
4.Externalenduserdevice,e.g.DVDplayerorvideocamera(„VideoIn”connection).
Note: If you do not want to connect an external device via the S-Video connection,
then you also have the opportunity to connect an external device by using a cinch
Chapter3
Installationandsoftwareinstallation
Chapter3
Installationandsoftwareinstallation
Installation and
software installation
adapter (included in delivery).
5.Usetheincluded3.5mmadaptercabletoattachyourTVcard,aswellasthesound
cardtothe„VideoOut”connection.
Software installation for Windows 000/XP
Afteranewbootsequencehasbeencompleted,Windows2000/XPwillautomatically
identifyyourTVcardasnewhardware.Windowswillinformyouthatnewhardware
hasbeenfound.
1.3.
Lieferumfang
Wenn Sie die Ware erhalten, prüfen Sie bitte den Inhalt auf Vollständigkeit
oder Beschädigungen.
Die folgenden Teile sollten enthalten sein:
•
“X4-TECH Vision TV-Card” (PCI)
• Audio-Kabel für die Soundkarte
• Fernbedienung
• Infrarot-Empfänger
• Bedienungsanleitung in Deutsch und Englisch
•
Installations- und Treiber-CD
• FM-Radio-Antenne
Nachdem der Rechner vollständig neu gestarten worde ist, wird Windows 2000/XP
automatisch Ihre TV-Card als neue Hardware identifizieren.
Das Fenster erlischt automatisch, nachdem Sie die Software installiert haben.
Legen Sie die Installations-CD in ihr CD-Rom Laufwerk.
Die CD startet automatisch und auf dem Bildschirm erscheint das
Installationsmenü.