- DL manuals
- X4-TECH
- Receiver
- X-Cept Car Mini
- Instruction Manual
X4-TECH X-Cept Car Mini Instruction Manual
Summary of X-Cept Car Mini
Page 1
Mobile dvb-t receiver instruction manual.
Page 2: Table of Contents
2 3 table of contents 5 chapter 1 intended use 5 explanation of symbols 6 chapter 2 safety information 10 before use 11 chapter 3 features 12 chapter 4 the device 13 remote control 15 batteries 17 chapter 5 connection 18 chapter 6 operation 18 first time installation 19 manual search 20 reset defaul...
Page 3: Intended Use
4 5 dear customer, thank you for deciding on purchasing this quality product from x4- tech. This instruction manual will give you a general idea of how this device operates, as well as provide you with information on cleaning and safety procedures. Please take a few minutes to read and follow all sa...
Page 4: Safety Information
6 7 chapter 2 safety information chapter 2 safety information › should any evident damage be seen on the device or on the connection cables, do not come in contact with or touch these. Switch off the corresponding circuit breaker in the po- wer distribution panel first, before carefully unplugging t...
Page 5
8 9 › never touch the power plug with damp or wet hands. There is the risk of electric shock! › make sure the device is properly ventilated during opera- tion and never operate it in constricted areas, such as for example in a bookcase or shelf. Never block ventilation ope- nings with papers, magazi...
Page 6: Features
10 11 operation, safety or when making connections or if any que- stions arise that are not explained within this manual. › contribute to a better environment by using a designated disposal system (e.G. Dual system in germany) or recycling site for the disposal of packaging material. Before use plea...
Page 7: The Device
12 13 1. 12 v dc power in jack 2. Ir jack 3. Antenna 1 jack 4. Antenna 2 jack 5. Ch+/– buttons 6. Power button 7. Power indicator 8. Remote sensor 9. Av out jack remote control 1. Tv/radio switch between radio/tv 2. Power switch on or go to standby 3. 0 – 9 select program or input appropriate parame...
Page 8
14 15 10. Search research channels 11. Mute mute or resume the volume 12. Recall call back the previous channel 13. Info displays the information of programme or watch the operation guide 14. Epg electronic programme guide 15. Up/down arrow keys channel selection or move cursor up/down in menus 16. ...
Page 9: Connection
16 17 › always change/replace all batteries at the same time. › clean battery and device contacts before inserting, where required. Please comply to the following steps completely to connect the product: 1. Connect the cables to your car. 2. Connect this unit with your tv using the av cable. 3. Inse...
Page 10: Operation
18 19 first time installation if you use this unit, tv will display as following: › press „ok“. › press „arrow up/down“ to select your country, then press „ok“. › press „exit“ button to return the upon interface. › press „arrow up/down“ button to select „automatic search“. › press „ok“ button to sta...
Page 11
20 21 › select „manual search“ and press „ok“. › press „ok“. › press „arrow up/down“ to select channel or frequency input way. › press „ok“ button to confirm. › press „arrow up/down“ to select search icon, then press „ok“ button. › when you finished search (save icon is lighted), press „ok“ button. ...
Page 12
22 23 edit and favorite channels › on the main menu interface, press the „arrow left or right“ button to select „channel list“ and press „ok“ button to confirm. › press „arrow up/down“ to select „edit “or „favorite channels“, press „ok“ button to confirm. Please refer to the guide on the screen. Lan...
Page 13: Troubleshooting
24 25 the device you have just purchased is equipped with state-of-the-art technology and is safe to operate. Nevertheless, problems or malfunc- tions may occur. Before contacting a service technician, refer to the following possible solutions: problem solution no or bad signal the aerial is not poi...
Page 14: Maintenance and
26 27 carry out a technical safety inspection on a regular basis, e.G. Check if the power cable or housing may have become damaged. If there is reason to believe that the device can no longer be opera- ted safely, then disconnect it immediately from the power supply and secure it against any uninten...
Page 15: Specifications
28 29 technical data › transport stream: iso/iec 13818 › video decoding: mpeg-2 mp@ml › input frequency: vhf, uhf › input impedance: 75 unbalanced › cofdm spectrum : 2k and 8k mode › guard interval: 1/32, 1/16, 1/8 und 1/4 › demodulation method: qpsk, 16qam, 64qam › resolution: 720 x 576 (pal), 720 ...
Page 16
30 www.X4-tech.De version 1.0 – 8/2009.