Xantech MRC88M Quick Start Instructions - page 2
-
2
-
Enabling the XIS100 driver
1) Open the Project Options dialog box (“File->Project Options”).
2) Select the “Source Components” tab.
3) Select the “XIS100” tab.
4) Click the “Enabled” check box to enable XIS100-1. (Note that the MRC88m supports up to 8
XIS100’s, denoted XIS100-1 thru XIS100-8. For this example we are going to be using XIS100-1.)
In the “Port:” field, make sure that “Com Port” is selected. This lets the driver know how the XIS100 is
connected to the MRC88m.
Telling the MRC88m which source input is connected to the XIS100
1) In the “Source Input” region, click the check box next to the “Connect to Source Input” text.
2) Make sure that “Source 1” is selected in the drop-down box to the right. This let’s the MRC88m
know that Source 1 in the system is the XIS100.
3) Click “OK” at the bottom of the dialog box to close the “Options” dialog.