Xblue Networks PCS Mail Installation Manual - page 50
PCS
- 50 -
| Installation Manual |
CCR Menu Greetings
The ADMIN MAILBOX (Administrator Mailbox) is a special Mailbox that is not
used for any messaging or transfer operations. It allows specific programming
functions using the Touch-tone
®
pad on any telephone.
To access System Admin Mailbox dial into any available PCS mail
port and
follow these steps:
1. Dial a voice mail extension connected to your PCS mail
port 1- 4. It is
suggested that the last ports in the system are used as Voicemail ports.
For example, with a 3 x 8 system the suggested ports would be 16, 64, 17,
and 65.
2. When the system answers, dial [
#], when prompted, dial the System
Administrator Mailbox number. See list below for your numbering plan:
[
#][0]…………….. 2
digit
Mailbox
system
[
#][0][0]…………. 3
digit
Mailbox
system
[
#][0][0][0]……… 4 digit Mailbox system
The complete dial sequence for a 3-digit integration (System48) is [
#][#][0][0]
1. The system will announce: “Mailbox 0” – which is the System Admin
Mailbox number.
2. When requested, enter the default password-[
9][#][5][6]. (This
password may be changed by pressing [
2] for Mailbox Administration;
enter the System Admin Mailbox number as shown above and next
pressing [
1] to change an access code. Enter a new access code
0000 – 9999, Then Press #)
The System Admin Mailbox menu will now play.
* Rerecorded System Prompts can not be restored without being sent back to the
factory!
Administrator Mailbox Options
For System Greetings Press 1
For Mailbox Administration
Press 2
For Auto Attendant Configuration
Press 3
To set Date and Time Press 4
To set Operation Mode Press 5
To select PBX Integration Press 6
To Record a System Prompt* Press 7
To Listen to a Prompt Press 8
Modify Open & Closing Schedule
Press 9