XDECT 7005WP Owner's Manual - If...
3
Place the handset in the charger with the display facing forward. The display on
6)
the handset should turn on.
If...
Try...
the handset display
does not turn on
Checking the AC adapter connection.
-
Seeing if the outlet is controlled by a wall switch.
-
Check handset activation at step 2 above.
-
Charge the handset completely (about 16 hours) before using it.
Registering to a Base
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's XDECT 7015 and XDECT 7055 bases.
Other compatible Uniden bases include the SSE25, SSE27, DECT 2015 and DECT2035
models. Some features may not be available when using the XDECT 7005WP with
these other bases. For the most up-to-date list of which bases this handset is
compatible with, see our website.
Registration Methods
If the other base has
an LCD display:
If the other base DOES NOT have
an LCD display:
On the base, open the menu.
1)
Select
2)
Register Handset. The
display should say Handset
Registering.
Disconnect the base AC adapter.
1)
On the base, press and hold
2)
FInD
while you reconnect the adapter.
On the handset, press and hold
3)
HASH (#)
until the display says Handset
Registering (about 2 seconds).
After about 30 seconds, the handset display should say Registration Complete.