XDECT 7005WP Owner's Manual - Test The Connection
4
Test the connection
Pick up the handset and press
TAlk/FlASH
. Make sure you get a dial tone.
(Press
EnD
to hang up.)
If...
Try...
you don't hear a dial tone
-
the display says
-
Registration Failed
Making sure the handset is fully
charged, then trying again.
How to De-Register the Handset (for Registering to another base)
On the handset, press and hold
1)
EnD
and
HASH(#)
until the System Reset menu
appears (about 5 seconds).
Select
2)
Base Unavailable.
When the phone asks you to confirm, select
3)
Yes. The handset deletes its own link
without contacting the base.
Using the Belt Clip
To attach the belt clip
Line up the holes on each side of the handset. Insert the belt clip into the holes on
each side of the handset. Press down until it clicks.
To remove the belt clip
Pull either side of the belt clip to release the tabs from the holes.
Important Information
Because the handset adapts to the base, the exact features and operation of the
handset will vary slightly depending on which base you register the handset to.
Refer to the user guide for the base you're registering the handset to for feature
descriptions.
All features and operation for the handset are described in the owner's manual
for one of the bases listed under the Compatible Bases section.
Owner's manuals for all Uniden phones are available on our website for free
downloading.