Xenarc 700TSV Installation Manual - │ Hardware Installation
12
│ Hardware Installation
700 Source Configuration
Press MENU to enter the OSD menu.
Then press the right button to the “ SOURCE ” category,
and press select button to select the category.
Press the right button to choose “ Source Enable ”
Operating instructions from monitor:
1. Under the OSD menu, press the LEFT or RIGHT button to select
the source for adjustment.
Press the MENU button to enable or disable the source.
Click the SELECT button followed by the MENU button to exit, or
simply wait for the OSD menu to disappear.
2. Switching sources : Press the SELECT button to switch to a
different source.
Operating instructions from Remote control:
1. By using the remote control, press the LEFT or RIGHT button to
select the source for adjustment. Press Enter “
” to enable or
disable the source. Click the DOWN button followed by the MENU
button to exit, or simply wait for the OSD menu to disappear.
2. Switching source : Press the SOURCE button to switch to a different
source.
SPECIAL NOTE:
Note #1: You can only disable one of the sources from AV1 or AV2.
The OSD by default will not allow the option to disable both
source together.
Example: If you have already disabled the AV1 source and you
wish to disable the AV2 source instead, you will need to
first enable the AV1 source in order for you to disable
the AV2 source.