Xenios BODYWEIGHT GYM BASIC Assembly Instructions Manual - Bodyweight Gym
5
For those who needs to exetend their workout variants, Xenios USA
®
thought the Workout Bar.
*
1
It is made by using a steel hollow chromed tube, coated
with a soft-touch grip rubber sleeve. That bar weighs less than 3 Kg. and its length is totally 107 cm.
The bar can be disassembled and split in two shorter bars, thanks to a special screw-in / screw-out welded-in bolt.
RINGS ARE EQUIPPED WITH
NYLON BUSHING SO TO TURN
AS SMOOTHER AS POSSIBLE
Both bars' ends are equipped with a 360° steel ring. The bar can be hooked at the Bodyweight Gym
™
adjustable straps carabiners so to perform a barbell-
suspension-workout ! When the bar is split in two parts, it fits in to the Bodyweight Gym
™
PRO back-pack so to be carried anywhere.
The Workout Bar can be used even together with one or two Xenios USA
®
Elastic Tubes
*
2
with carabiners. It can be used to perform dozen of workouts,
either by using one arm or by using both arms. It can be lifted up, pushed down or swung !
OPTION
*3
:
WALL ANCHORING STATION (WALL AND CEILING MOUNT)
The Workout Anchoring Station was drawn to be installed (screwed-in) either on the ceil or on a wall of a workout room.
It provides four stiff anchoring hooks to let up to four users at a time to workout.
* Included in to the Bodyweight Gym
™
PRO - sold as a separate add-on for the Bodyweight Gym
™
BASIC.
*
1
The Xenios USA
®
Workout Bar is sold separately from the Bodyweight Gym
™
kits.
*
2
Xenios USA
®
elastic tubes are sold separately.
*
3
Hardware to screw-in the Wall Anchoring Station is not provided with the product.
BODYWEIGHT GYM
™
OPTION:
43” WORKOUT BAR W/360
°
RINGS AND FOAM GRIP (107 cm.)