XENO XDR960 User Manual - page 20
User’s Manual | 20
Red Circle icon button
means
“instant (emergency) recording”, which is useful to urgently start recording. In
emergency recording, the system follows the panic record settings. The default settings for panic record is 30(25)FPS @
960x480(576) Resolution for all channels. If you want to change the panic record settings for each channel, please go to
RECORD Panic Record.
Joystick icon button
means
“PTZ” mode, which is useful to instantly switch to PTZ control. In PTZ mode, user can
move pan/tilt and zoom-in/out by moving the mouse pointer, like a virtual joystick.
User can click the right-forwarded arrow button
to automatically playback the latest video clip.
Circle icon button
means the HDD usage percentage by video recording. If it shows 60%, then 60% of HDD space
has been used up for recording.
N
OTE
If you cannot find any colored-mark in the top right corner of the live screen mode, then it means that the
system does not record any image. In this case, you need to check recording schedule or camera of the
main setup menu.
3.3.5 Pop-up Menu
User can click the right button of the mouse to pop up sub-menu as shown below.
When
“SEQUENCE” is selected,
icon is shown on the bottom right corner of the screen, and display screen will
be sequentially changed.
When
“ZOOM” is selected on full screen mode, digital zoom function is activated and
icon is shown and zoomed
area will be displayed on the bottom right corne. In zoom pop-up menu, the user can move a yellow box by using the mouse
to drag in the desired area of the camera to zoom. In order to go back to live display mode, please click
“Zoom” again.