XENO XDR960 User Manual - page 31
31 | Chapter 1 : DVR User Manual
The system does not record in normal operation but records only when motion is detected as set by
“MOTION” in the “DEVICE” menu and when a sensor is triggered as set by “SENSOR” of “DEVICE”.
If user sets
“OFF” in both “MOTION” and “SENSOR” in the “DEVICE” menu, then the system will
neither record nor notify the Advanced Client Software or Central Management System.
Purple color -
“Continuous” + “Motion detection” + “Sensor-activated” recording
The system records
all the time by “continuous” as set by the “CAMERA” in the “RECORD” but will
switch recording mode to the motion configuration specified by
“MOTION ALARM” in the “DEVICE”
menu, if motion is detected in the motion area. It will switch recording mode to the sensor
configuration defined by
“SENSOR” in the “DEVICE” menu, if a sensor is triggered during dwell time.
3.11.2 Event Log
The Event log search is used to find particular event, quickly and easily.
Click
play icon to play back the selected event data.
Users can copy this event list to a USB memory device in text file format.
Once a USB memory stick is inserted into the USB port, the user must press
“SCAN” button to detect the USB stick and then
press
“EXPORT” to copy the log information to the media.
To see a particular event, move the arrow button of the Front Panel or Remote Controller to the desired time range.
The following are the categories indicated on the Event Viewer.
1.
Alarm by Sensor
2.
Alarm by Motion
3.
Alarm by Video Loss
4.
Alarm by Panic
5.
Alarm by HDD Full
N
OTE
If the Alarm does not activate even though the alarm input setting has been made, check the alarm
connection port of the DVR rear panel.
C
AUTION
Dark Blue Color
The data recorded during DST (Daylight Saving Time) will be indicated in Dark Blue color in the
Intelli-Search Bar on playback mode.