B r a n d model hpx10 series automatic battery charger user’s manual rev. 1.0 october 17, 2006 for sales, support and service phone: 407-331-4793 fax: 407-331-4708 website: www.Xenotronix.Com email: information@xenotronix.Com xenotronix/tli, inc. 2541 tracy road toledo, ohio 43619 phone: 419-666-698...
Warranty seller warrants that its products ("product(s)") will meet the specifications set forth in its catalog from time to time, unless the buyer is notified otherwise prior to delivery. Seller will, without charge, repair or provide a replacement for any of the products which prove to be defectiv...
Table of contents model hpx10 automatic battery charger – user’s manual important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 assembly ...
Hpx10 user’s manual xenotronix/tli 1 important safety instructions save these instructions - this manual contains important safety and operating instructions for model hpx10 battery chargers. Before using the battery charger, please read all instructions and cautionary markings on the battery charge...
Hpx10 user’s manual xenotronix/tli 2 introduction this unit is a two stage, constant voltage battery charger with current limiting, current fold back, and automatic temperature compensation of the output voltage. It is protected against shorting the output terminals and reversing the output terminal...
Hpx10 user’s manual xenotronix/tli 3 plug the charger into a properly grounded outlet which supplies the correct input voltage. The indicator light should now be on indicating that the charger is operating. Determine the battery polarity. Most batteries identify the positive terminal with a “+” sign...
Hpx10 user’s manual xenotronix/tli 4 following precautions (refer to these charger specifications & your battery documentation for proper switch and charge currents to determine compatibility with this charger): o when charging a larger capacity battery, it is possible the current will never reduce ...
Hpx10 user’s manual xenotronix/tli 5 the battery - there should be about 2.15 v/cell for a properly charged battery (divide the battery voltage by two to get the number of cells). If the battery voltage looks correct then you may be trying to charge a battery which has too large a capacity for the c...
Hpx10 user’s manual xenotronix/tli 6 battery recommendations lead-acid batteries charged @ c/10 rate. Smaller capacity batteries may require a smaller charge current to be safely charged. Consult the battery manufacturer or xenotronix/tli. Model battery hpx10-06c100 6 v, 10 ah hpx10-12c080 12 v, 8 a...
Hpx10 user’s manual xenotronix/tli 7 model hpx10 series automatic parallel battery charger supplemental instructions important precautions follow the battery manufacturer’s recommendations when selecting a battery for use with this unit. The battery should be able to accept the full rated output cur...
Hpx10 user’s manual xenotronix/tli 8 yellow to green when the unit is operating in the constant voltage mode at about 75%, or less, of its maximum rated current. In the constant voltage mode the unit is regulating voltage and the battery is being properly charged. When the indicator first changes fr...
