Xenotronix HPX10 Series User Manual - page 9
HPX10 User’s Manual
Xenotronix/TLI
6
BATTERY RECOMMENDATIONS
Lead-acid batteries charged @ C/10 rate. Smaller capacity batteries may require a smaller
charge current to be safely charged. Consult the battery manufacturer or Xenotronix/TLI.
Model
Battery
HPX10-06C100 6 V, 10 Ah
HPX10-12C080 12 V, 8 Ah
Ah = Ampere-hours
Lead-Acid Batteries are nominally rated at
2V per cell (6V = 3 cells and 12V = 6 cells).
DIMENSIONS
POWER / FLOAT
FAST CHARGE
FAULT
CAUTION:
ACCESSORIES
Optional Output Cables:
All output cables are 6’ long and made using black, 18 AWG zipcord. One end has a
custom molded connector for attaching to the output terminal strip and the other end may
be chosen from the following options:
o
HPXCS-1
Red and black insulated battery clips
o
HPXCS-2
Bare wire leads. Positive lead identified with sticker
o
HPXCS-3
Barrel plug connector, 2.5mm ID, 5.5mm OD
o
HPXCS-4
Cigarette lighter plug
o
HPXCS-5
Pressure contact “p-clip” for Panasonic LCS-2012 (or equivalent)