Xerox 7300DX - Phaser Color Laser Printer Specification

Other manuals for 7300DX - Phaser Color Laser Printer: Service Manual, Overview

Manual is about: Color Printer

Page of 14

Download

Print this page

Bookmark us

Phaser® 7300 Color Printer

Specialty Printing

This section covers:

■

Automatic 2-sided printing — see page 12.

■

Manual 2-sided printing — see page 14.

■

Transparencies — see page 19.

■

Envelopes — see page 22.

■

Labels, Business Cards, Greeting Cards, CD/DVD Inserts, and CD/DVD Labels —

see page 24.

For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,

refer to the Supported Papers section of the Trays and Paper Guide on the Interactive Documentation

CD-ROM.

Caution

Automatic 2-sided printing

To have the printer do automatic 2-sided printing (duplexing):

■

The printer must have a duplex unit installed.

■

The paper must be loaded in a tray. The printer will NOT do automatic 2-sided printing on paper

loaded in the Multi-Purpose Tray.

■

The paper must have a weight of 75-105 g/m

(20 - 28 lb. bond).

■

The paper size must be A5 or larger. The printer will NOT do automatic 2-sided printing on paper

smaller than 148 x 210 mm (5.83 x 8.27 in.).

■

The paper type must be Plain Paper, Letterhead, or Special.

Caution

DO NOT use any specialty media (such as glossy coated paper), envelopes, or labels for

automatic 2-sided printing. Any damage caused by duplexing specialty media may not be

covered under your printer warranty.

For best results with automatic 2-sided printing, do not use heavy toner coverage on the even-numbered

pages of your print job.

When you print any job, you can use the printer driver to select the orientation of the images on the

page: Portrait or Landscape. When you print 2-sided jobs, you also select the binding preference,

which determines how the pages turn; refer to the table on page 14 for the wording used in the printer

drivers for binding preference.

You MUST set the paper type and size in the

printer’s front panel any time you add paper to

the printer. If you change paper sizes or types,

take a moment to ensure that the front panel

values agree with your paper choice. If you fail

to do this, you can damage the printer’s fuser.

6200-45

1 2 3 4 5 6 7 Next › »

Summary of 7300DX - Phaser Color Laser Printer

Page 1
Phaser® 7300 color printer copyright © 2002 xerox corporation. All rights reserved. 12 specialty printing this section covers: ■ automatic 2-sided printing — see page 12. ■ manual 2-sided printing — see page 14. ■ transparencies — see page 19. ■ envelopes — see page 22. ■ labels, business cards, gre...
Page 2
Specialty printing phaser® 7300 color printer 13 to do automatic 2-sided printing: 1. Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. For more information, refer to the trays section of the trays and paper guide on the...
Page 3: Manual 2-Sided Printing
Specialty printing phaser® 7300 color printer 14 manual 2-sided printing if the printer doesn’t have a duplex unit, you can still have the printer print on both sides of the paper. However, you must have the printer print all of the odd-numbered pages first, reinsert the printed pages in the tray, t...
Page 4
Specialty printing phaser® 7300 color printer 15 manual 2-sided printing using trays 1 - 5 printing side 1 1. Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. For more information, refer to the trays section of the tray...
Page 5
Specialty printing phaser® 7300 color printer 16 printing side 2 1. Insert the paper printed with side 1 into the tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. 2. In the printer driver, select the tray containing the paper. 3. Send the job to the pr...
Page 6
Specialty printing phaser® 7300 color printer 17 manual 2-sided printing using the multi-purpose tray printing side 1 1. Insert a stack of paper into the multi-purpose tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. For more information, refer to the ...
Page 7
Specialty printing phaser® 7300 color printer 18 printing side 2 1. Insert the paper printed with side 1 into the multi-purpose tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. 2. In the printer driver, select the multi-purpose tray as the paper source...
Page 8: Transparencies
Specialty printing phaser® 7300 color printer 19 transparencies transparencies can be printed from tray 1 or the multi-purpose tray. Handle transparencies by the edges and with both hands to avoid fingerprints and creases, which can cause poor print quality. Xerox phaser 35-series transparencies xer...
Page 9
Specialty printing phaser® 7300 color printer 20 printing transparencies from tray 1 1. Insert the transparencies long-edge feed into the tray. For more information, refer to the trays section of the trays and paper guide on the interactive documentation cd-rom. 2. Do not load transparencies above t...
Page 10
Specialty printing phaser® 7300 color printer 21 printing transparencies from the multi-purpose tray 1. Insert the transparencies long-edge feed into the multi-purpose tray; (maximum capacity is 50 sheets). For more information, refer to the trays section of the trays and paper guide on the interact...
Page 11: Envelopes
Specialty printing phaser® 7300 color printer 22 envelopes guidelines for envelope printing ■ envelopes can only be printed from the multi-purpose tray. ■ use only paper envelopes. ■ do not print on the back of the envelope. ■ keep unused envelopes in their packaging to avoid the effects of moisture...
Page 12
Specialty printing phaser® 7300 color printer 23 2. When the front panel prompts you to confirm or change the selected paper type and size: a. Press the down arrow key to scroll to change , then press the ok key. B. Scroll to envelopes and press the ok key to save your selection. C. Scroll to the co...
Page 13
Specialty printing phaser® 7300 color printer 24 labels, business cards, greeting cards, cd/dvd inserts, and cd/dvd labels labels, business cards, greeting cards, cd/dvd inserts, and cd/dvd labels can only be printed from the multi-purpose tray. The number of sheets that can be loaded depends on the...
Page 14
Specialty printing phaser® 7300 color printer 25 2. Insert the sheets short-edge feed into the multi-purpose tray. Place the side to be printed faceup with the top of the sheet entering the printer first. For more information, refer to the trays section of the trays and paper guide on the interactiv...