Xerox Color C60 Series User Manual - page 50
Paper Types/Weights Accepted in Trays
When loading media in a paper tray, refer to the following chart for the paper types and
weights that are accepted in each of the feeder paper trays available. Select the
appropriate tray depending on the media you plan to use.
Note
The Oversize High Capacity Feeder (OHCF) provides the best feeding performance,
especially for coated media.
Paper Type weight range can be selected in one of two ways:
• Select the Paper Type from the following table and apply the proper weight range
using the options available from the Control Panel screen, or
• Select Other Media Selection... and select the specific media weight range from the
available list on the Control Panel screen. Some features such as Printing Reports or
Auto Tray Switching may be limited.
Note
If you want to define the image quality setting with a different paper weight range to
optimize image quality, refer to the Paper Tray Settings section of the System
Administrator Guide.
Accepted Types and Weights
Paper Trays
Other Media Selection...
All Trays
Plain (64-79 gsm)*
Plain Reloaded (64-79 gsm) *
Recycled (64-79 gsm) *
Hole Punched (64-79 gsm) *
Pre-Printed
Letterhead
Other Type
Heavyweight 1 (106-128 gsm) *
HW 1 Reloaded (106 -128 gsm) *
Heavyweight 2(177-220 gsm)
All Trays (cont.)
HW 2 Reloaded (177-220 gsm)
Heavyweight 3 (221-256 gsm)
HW 3 Reloaded (221-256 gsm)
Hole Punched HW 1 (106-128 gsm) *
Hole Punched HW 2 (177-220 gsm)
Hole Punched HW 3 (221-256 gsm)
Coated 1 (106 -128 gsm) *
Coated 1 Reloaded (106-128 gsm) *
Coated 2 (151-176 gsm) *
All Trays (cont.)
Xerox
®
Color C60/C70 Printer
4-4
User Guide
Loading Media