Xerox DC240 - DocuColor 240 Color Laser Release Note

Customer Release Notes

Fiery Network Controller for DocuColor 250/240, 

version 1.0

Part Number: 45045321

10 June 2005

Copyright 2005 © Electronics for Imaging, Inc.

This document contains information about the Fiery Network Controller for DocuColor 

250/240 version 1.0. Before using the Fiery Network Controller for DocuColor 250/240 

with version 1.0, make copies of these 

Customer Release Notes

 and the 

Quick Connect Guide

and distribute them to all users.

N

OTE

: 

This document uses the term “Fiery” to refer to the Fiery Network Controller for 

DocuColor 250/240. The term “copier” is used to refer to the DocuColor 250/240 copier.

Before printing to the Fiery, make sure system software version 1.0 is installed on the Fiery. 

To determine this, print a copy of the Configuration page from the copier Control Panel, 

as follows:

1 Press the Machine Status button.

2 Touch the Billing Meter/Print Report tab on the touch screen.

3 Touch the Print Report/List option, and then the Network Controller Jobs Report option.

4 Select the System Setting List option.

5 Press the green Start button to print the Configuration page.

You must also install user software version 1.0 onto client computers. For instructions, 

see 

Printing from Windows

 and 

Printing from Mac OS

.

User 

documentation

User documentation available online

For user documentation in all supported languages, including the 

Customer User Addendum

, 

see the following website:

http://services.efi.com/support/vfigs/9019710383/

System software

System software installation

If you install system software from a client computer over the network, and the installation 

fails because of connection timeout, exit any applications and disable any virus protection 

software and any pop-up blocker on the client computer.

After installing or upgrading software

After upgrading or reinstalling your system software, you must reboot the Fiery.