Xerox DocuColor 7000AP Quick Start Manual - page 15
DocuColor 7000AP/8000AP Quick Start Guide
11
Exercises
Upper Transport Area jam
Jams occur in this area only when the Second
Feeder Module containing Trays 3 and 4 is
connected.
1.
Pull out the Transport Area drawer above
Tray 1.
2.
Lift up the handle.
3.
Remove all jammed paper.
4.
Return the drawer to its original position.
5.
Follow the instructions on the UI to clear other
areas or to resume your print job.
Transport Module jams
Open the areas in the Transport Module indicated
on the UI. Carefully remove all jammed paper.
1.
Open the Transport Module door.
2.
Grasp the green handles 3a, squeeze and
move it to the right.
3.
Carefully remove all jammed paper.
4.
Reposition handles 3a.
5.
Lift up green handles 3b.
6.
Carefully remove all jammed paper and
return handles 3b to the original position.
7.
Follow the UI messages and, if required, lift
handles 7a and remove all jammed paper.
Return handles 7a to the original position.
8.
Squeeze handles 7b and lower to the right.
Remove all jammed paper. Return handles
7b to the original position.
9.
Squeeze handles 7c and lower to the left.
Remove all jammed paper. Return handles 7c
to the original position.
10.
Close the Transport Module door.
11.
Follow the instructions on the UI to restart
your print job.
3a
7c
7b
3b
7a