Xerox DocuColor 7000AP Supplementary Manual - page 10

DocuColor 7000AP/8000AP Decurler Adjustment

6

Decurler Adjustment

4. The Decurler Setup screen opens.

a. From the Paper Tray menu, select the tray that contains 

the paper you are using on the job. The default selection is 

Tray 1.

NOTE:

If you have an optional SFM attached, Trays 3 and 4 also appear 

on this screen.

b. Select the job’s stock coating:

Uncoated

 or 

Coated

.

c. Make a selection from the 

Paper Weight

 range menu.

d. The default Paper Type is automatically applied by the 

printer for the Paper Tray, Coating and Paper Weight 

values you entered. Select an alternate Paper Type from 

Paper Type A through Paper Type D to change the amount 

of decurling applied. As an example, if the system 

automatically selects Type B, select Type C.

NOTE: The Type E settings are custom entered values that 

are explained later in this section. While the Type E settings 

can be selected, they need to be programmed prior to 

selection. 

See “Decurler E Table Settings” on page 8.

e. Touch the 

Close

 button to save your selections and return 

to the Machine Defaults 2 screen.

NOTE: Touch the Reset button on the Decurler Setup screen to 

return to the settings established when you first accessed the 

screen. As an example, if the system automatically selected Type 

B and you changed it to Type C, the system will return the setting 

to Type B.